HI,
Delete the drives from NBU. If you are using SSO delete them only from the
old media server.(If you do not use SSO delete the robot too)
Do the zoning of the drives so only the new server can see the drives (and
the robot, if necessary).
Configure the drives at the OS (drivers)
Rerun the device configuration wizard, only for the new media server.
stefanos

-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of NBU
Sent: Tuesday, July 29, 2008 9:33 AM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Addition of New Drives in Existing Setup


Hi Forum,

I need to remove 2 drives from one media server and configure it in other
media server.

Setup is of 6.0 Mp4 Master/media servers.

Can any one help with complete steps to be done.


Thanks

+----------------------------------------------------------------------
|This was sent by qureshiumar AT rediffmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu



_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu