Did you up your NBU buffer settings to
account for the increased performance of LTO-4?
You can check this technote to determine
which settings to check and if your media server has enough resources to push
these upgraded drives:
http://seer.entsupport.symantec.com/docs/183702.htm
I’ve heard that 1MB is useful for
the buffer size (1048576) but you’ll need to test to really nail it down.
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Esson, Paul
Sent: Wednesday, April 09, 2008
09:43
To:
veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] LTO-4 on
Linux
Folks,
Has anybody out there
configured LTO-4 drives on Linux Red Hat ES 4? I recently swapped out a pair
of LTO-2 drives for LTO-4 drives on a v5.1 Media Server and have seen no
throughput performance improvement. I did the same test on a Windows 2003
Server using the same data and saw significant improvement, but the Windows OS
has a specific driver for the LTO-4. Linux uses the mt driver, but I
can’t see anything on the web specifically about tuning the mt driver for
LTO-4.
Regards,
Paul Esson
Redstor Limited
Direct:
+44
(0) 1224 595381
Mobile: +44 (0)
7766 906514
E-Mail:
paul.esson AT redstor DOT com
Web:
www.redstor.com
REDSTOR LIMITED
Torridon House
73-75 Regent Quay
Aberdeen
UK
AB11 5AR
Disclaimer:
The information
included in this e-mail is of a confidential nature and is intended only for
the addressee. If you are not the intended addressee, any disclosure,
copying or distribution by you is prohibited and may be unlawful.
Disclosure to any party other than the addressee, whether inadvertent or
otherwise is not intended to waive privilege or confidentiality.