On Tue, 26 Feb 2008, Dominik Pietrzykowski wrote:
>
>
>> One last question (for now): when you add the robot (ACSLS) and tape
>> drives to the new media servers, how do you go about doing it (your
>> method)?
>
> I use the GUI wizard, it might be faster using command line but I'm lazy.
> I've also found that I make mistakes using the command line sometimes.
>
>> Could you show your tpconfig -d on the media server using:
>>
>> 1. 9840 drives
>
> They're 9940's but irrelevant to the core of the example
>
>> 2. T10K drives
>
> / > tpconfig -d
> Id DriveName Type Residence
> Drive Path
> Status
> ****************************************************************************
> 0 STK.T10000A.000 hcart3 ACS(3) ACS=0, LSM=2, PANEL=1, DRIVE=3
> /dev/rmt/20cbn UP
> 1 STK.T10000A.001 hcart3 ACS(3) ACS=0, LSM=1, PANEL=1, DRIVE=15
> /dev/rmt/33cbn UP
> 2 STK.T10000A.002 hcart3 ACS(3) ACS=0, LSM=1, PANEL=1, DRIVE=3
> /dev/rmt/36cbn UP
> 3 STK.T10000A.003 hcart3 ACS(3) ACS=0, LSM=0, PANEL=1, DRIVE=15
> /dev/rmt/49cbn UP
> 4 STK.T10000A.004 hcart3 ACS(3) ACS=0, LSM=3, PANEL=1, DRIVE=15
> /dev/rmt/01cbn UP
> 5 STK.T10000A.005 hcart3 ACS(3) ACS=0, LSM=2, PANEL=1, DRIVE=15
> /dev/rmt/17cbn UP
> 6 STK.T10000A.006 hcart3 ACS(3) ACS=0, LSM=3, PANEL=1, DRIVE=3
> /dev/rmt/04cbn UP
> 7 STK.T10000A.007 hcart3 ACS(3) ACS=0, LSM=0, PANEL=1, DRIVE=3
> /dev/rmt/52cbn UP
> 9 STK.T9940B.004 hcart2 TLD(0) DRIVE=1
> /dev/rmt/71cbn UP
> 10 HP.ULTRIUM3-SCSI.001 hcart TLD(0) DRIVE=4
> /dev/rmt/65cbn UP
> 11 HP.ULTRIUM3-SCSI.000 hcart TLD(0) DRIVE=3
> /dev/rmt/66cbn UP
> 12 STK.T9940B.000 hcart2 ACS(3) ACS=0, LSM=3, PANEL=1, DRIVE=12
> /dev/rmt/13cbn UP
> 13 STK.T9940B.001 hcart2 ACS(3) ACS=0, LSM=2, PANEL=1, DRIVE=12
> /dev/rmt/29cbn UP
> 14 STK.T9940B.002 hcart2 ACS(3) ACS=0, LSM=1, PANEL=1, DRIVE=12
> /dev/rmt/45cbn UP
>
> Currently defined robotics are:
> TLD(0) robot control host = recyclebin-bkup
> ACS(3) ACSLS server = acsdov,
>
> EMM Server = tardis-bkup
>
> / >
>
>
>
>> And also the commands you used to configure them, and also:
>> /usr/openv/volmgr/bin/vmglob -listall -b on the master?
>
>
> /nbdb/images/imaging-bkup/1186000000/catstore > /usr/openv/volmgr/bin/vmglob
> -listall -b
> device
> type device name serial number host name
> ------------------------------------------------------------------------
> robot ROBOT3 ACS-0-acsdov buup001
> robot ROBOT0 MPC02205020 buup001
> drive STK.T9940B.002 479000035672 buup001
> drive STK.T9940B.001 479000033369 buup001
> drive STK.T9940B.000 479000018610 buup001
> drive HP.ULTRIUM3-SCSI.000 HU106449YG buup001
> drive HP.ULTRIUM3-SCSI.001 HU10645MC1 buup001
> drive STK.T9940B.004 479000012703 buup001
> drive STK.T10000A.007 531002002255 buup001
> drive STK.T10000A.006 531002003486 buup001
> drive STK.T10000A.005 531002002483 buup001
> drive STK.T10000A.004 531002002684 buup001
> drive STK.T10000A.003 531002003468 buup001
> drive STK.T10000A.002 531002003474 buup001
> drive STK.T10000A.001 531002003475 buup001
> drive STK.T10000A.000 531002003900 buup001
>
> I've shortened the output as I'm guessing you just want to see what it looks
> like.
>
>
> Cheers,
>
> Dominik
Exactly what I was looking for, thank you.
Justin.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|