Re: [Veritas-bu] Calculate perfomance
2007-11-29 09:20:29
If your firmware is up to date on the i2K, you can use the tool in the robot
firmware to show the drive usage.
It is run from the ADIC java gui for the library.
Bobby Williams
2205 Peterson Drive
Chattanooga, Tennessee 37421
423-296-8200
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of kjbaumann
Sent: Wednesday, November 28, 2007 4:14 PM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Calculate perfomance
All,
We are running NB enterprise server and we have 6 LTO3 tape drives in an
ADIC I2K connected via fiber.
My question is how do I know that my drives are being used to their full
ability? I want to make sure that I am sending enough data to the tape
drives so they constantly are spinning and not stopping to
rewind-record-rewind-record.
Any suggestions would be helpful.
Thanks.
+----------------------------------------------------------------------
|This was sent by kevin.baumann AT axcelis DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|