Should be!
Does the boot CD show you your NICs? NICs can be a problem sometimes.
> -----Original Message-----
> From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf
> Of rcarlisle
> Sent: Monday, November 05, 2007 8:22 AM
> To: Brooks, Jason; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] BMR Restore - Windows
>
>
> Jason,
>
> See answers below:
>
> Reneé Carlisle
> ServerWare Corporation
>
>
> -----Original Message-----
> From: Brooks, Jason [mailto:brooksje AT longwood DOT edu]
> Sent: Monday, November 05, 2007 8:15 AM
> To: rcarlisle; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] BMR Restore - Windows
>
> Couple of questions:
>
> 1. Version of NetBackup? I'm figuring, by what you've told
> us, 6.5, but want to make sure.
>
> Then environment is up on 6.5
>
> 2. BMR Client. Is it the same piece of hardware or a
> different box altogether?
>
> Very basic test for BMR...we took a new Windows box that was
> a test system, loaded a NBU 6.5 client onto it. Backed it up
> with to load teh BMR database. Ran prepare to recover,
> created a boot media and tried to boot from the media.
>
>
> 3. Network config: is the BMR master on the same subnet of
> client, or, at minimum, can you connect to the master from
> where your BMR client is located?
>
> Master and media are on the same subnet and we have full
> communication between the two.
>
>
> 4. If it's a new box, did you update the MAC address in the
> copied Current Config in NB?
>
>
> Same box as the master server, and I have confirmed that the
> mac address is in the current configuration on the client in
> the BMR database. I thought this one would be about as easy
> as you could get!
>
>
> Thanks
>
>
> Jason
>
>
> > -----Original Message-----
> > From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of
> > rcarlisle
> > Sent: Monday, November 05, 2007 7:23 AM
> > To: 'rcarlisle'; veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: Re: [Veritas-bu] BMR Restore - Windows
> >
> > one more critical piece of info...we are booting from CD on these
> > guys..not trying to PXE boot.
> >
> >
> >
> > Reneé Carlisle
> > ServerWare Corporation
> > cell 585-329-9788
> >
> >
> > Rochester Office
> > 1250 Pittsford-Victor Rd.
> > Building 100 - Suite 150
> > Pittsford, NY 14534
> > phone: (585) 785-6100
> > fax: (585) 292-1644
> > rcarlisle AT serverwarecorp DOT com <mailto:rcarlisle AT serverwarecorp DOT
> > com>
> > www.serverwarecorp.com <http://www.serverwarecorp.com/>
> >
> > [image] <http://www.serverwarecorp.com/>
> > Albany Office
> > 125 Wolf Road
> > Suite 309
> > Albany, NY 12205
> > phone: (518) 453-1296
> > fax: (518) 453-1282 rcarlisle AT serverwarecorp DOT com
> > <mailto:rcarlisle AT serverwarecorp DOT com>
> > <mailto:r AT serverwarecorp DOT com< /a
> <mailto:r AT serverwarecorp DOT com< /a> >>
> > www.serverwarecorp.com <http://www.serverwarecorp.com/>
> >
> >
> >
> >
> >
> >
> >
> > ________________________________
> >
> > From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of
> > rcarlisle
> > Sent: Sunday, November 04, 2007 8:41 PM
> > To: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: [Veritas-bu] BMR Restore - Windows
> >
> >
> > I am new to BMR and having trouble getting a windows client to
> > restore. It gives giving me an error about not finding a network
> > configuration. When I look under the "current"
> > configuration for the windows clients...I notice that it finds the
> > network interfaces, but there is nothing listed under network
> > routes...is that an issue?
> >
> > Thanks
> >
> > Renee Carlisle
> > ServerWare Corporation
> >
>
>
>
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|