That'll work in NetBackup but ACSLS knows better and you need to take care
of it there as well.
On Thu, 27 Sep 2007, Preston, Douglas L wrote:
> Don't change the media to HCART3 leave it HCART2 and configure the LTO3
> drives as LTO2
>
>
> Doug Preston
> Systems Engineer
> Land America Tax and Flood Services
> Phone 626-339-5221 Ext 1104
> Email dlpreston AT landam DOT com
>
>
> ------------------------------------------------------------------------
> ------------
> NOTICE: This electronic mail transmission may constitute a communication
> that is legally privileged. It is not intended for transmission to, or
> receipt by, any unauthorized persons. If you have received this
> electronic mail transmission in error, please delete it from your system
> without copying it, and notify the sender by reply e-mail, so that our
> address record can be corrected.
> ------------------------------------------------------------------------
> ------------
>
>
>
>
> -----Original Message-----
> From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Martin
> Ruslan
> Sent: Thursday, September 27, 2007 3:48 AM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] LTO3 mixed LTO2 drive using LTO2 cartridges
> withACSLS
>
> Sigh...
> As always, nobody in this forum want to help me.
> Thanks for Paul who tried to help me by replied me personally.
>
>
>
> On 9/26/07, Martin Ruslan <mit.martin AT gmail DOT com> wrote:
>
> Dear friends,
>
> I'm using the Storagetek Library, using ACSLS, where the drive
> is LTO2 and we adding the new LTO3 drives, but we still don't have the
> LTO3 cartridges.
> So, we still use the LTO2 cartridge for using on this LTO2 and 3
> drives.
> on the DR, we'll use only LTO3 drives (only for restore
> purposes)
> So this LTO2 cartridges will always be use on LTO3 drives.
>
> The problem is, when I want to use the LTO2 cartridges on LTO3
> drives, so I have to change the density of the LTO2 tapes right?
> So I run this: vmchange -new_mt hcart3 -m dc0273.
> Ok, the backup running well, the LTO2 cartridge can be used on
> LTO3 drives.
>
> But, when we want to add, or eject the cartridges from the
> Library, and we run the inventory robot on NBU, disaster happen.
> I got this error when doing the inventory on NBU side:
> Generating list of recommended changes ...Update failed: media
> ID DC0273 in database has media type 'HCART3', whichdiffers from media
> ID DC0273 in the robot which is (according to themedia type returned
> from the robot, adjusted by media type mappings)projected to have a
> media type of 'HCART2'.
>
> I think, this error comes because the ACSLS comparing his
> catalog database with the NBU catalog.
> Because, when I'm using other environment (without using the
> ACSLS), there's no problem at all.
> Is there any suggestion for this? Waiting for your help guys...
>
> Regards,
> Martin.
>
>
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|