Neil,

In 6.5 we have retired the set_ndmp_attr command in favor of the
tpconfig and tpautoconf commands. 

Mike Heck
CFT Symantec.


From: "Conner, Neil" <neil AT mbari DOT org>
Subject: Re: [Veritas-bu] Path syntax for adding an NDMP host in
        6.5???
To: "Keating, John" <John.Keating AT eberspaecher DOT com>,
        <veritas-bu AT mailman.eng.auburn DOT edu>
Message-ID:
        <DA82364018466D4D842186D5356746B101304478 AT ice.shore.mbari DOT org>
Content-Type: text/plain; charset="us-ascii"

>>From the filer console, run sysconfig -t to get a list of all your tape
devices and densities.  Match the correct density with the no-rewind
device.

 

You didn't say so, but I assume the filer is directly connected to the
tape drive(s)...  Remember to establish connectivity to the filer by
running /usr/openv/volmgr/bin/set_ndmp_attr.

 

Neil

 

 

________________________________

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Keating,
John
Sent: Friday, August 31, 2007 8:16 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Path syntax for adding an NDMP host in 6.5???

 

Hello all,

 

Does anyone know how I should address the "Path" in the Path Information
dialogue box when adding an NDMP tape device in NB 6.5. 

 

My environment is as follows:

Master/Media server: Win 2k3 Server standard

NAS device: Network Appliance FAS250

Robot device: Quantum 1500 w/ HP Ultrium drives

 

[Master server is directly attached to the robot via SCSI and
reads/writes to the NetApp via direct GBic network]

 

Thanks in advance,

John Keating

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20070831/
1cb42116/attachment.htm


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu