any
client set to auto detect is only very slow if there is a misconfiguration in
the chain.
auto neg has worked flawlessly for years assuming both sides
are configured to auto.
The
documented (IEEE 802.3??) behaviour if one side is auto and the other side
hardcoded is for the auto neg configured side to go to 100Mb/s Half Duplex.
(lowest common denominator.)
Since
the "hardcoded" side is usually set to FULL, you end up with a duplex mismatch
which kills performance.
If
you've still got old Sun HME cards ardoun, there is some auto-meg issues with
those, in combination with some older Cisco versions, but for the most part,
Auto is where it's at.
Auto
is actually a requirement for proper flow control in GigE.
Paul
--
did you check network settings on the NIC? Is it set to
100/Full (or whatever your network standard is)? I find any Windows
clients set to auto detect run very slow.
====================================================================================
La version française suit le texte anglais.
------------------------------------------------------------------------------------
This email may contain privileged and/or confidential information, and the Bank of
Canada does not waive any related rights. Any distribution, use, or copying of this
email or the information it contains by other than the intended recipient is
unauthorized. If you received this email in error please delete it immediately from
your system and notify the sender promptly by email that you have done so.
------------------------------------------------------------------------------------
Le présent courriel peut contenir de l'information privilégiée ou confidentielle.
La Banque du Canada ne renonce pas aux droits qui s'y rapportent. Toute diffusion,
utilisation ou copie de ce courriel ou des renseignements qu'il contient par une
personne autre que le ou les destinataires désignés est interdite. Si vous recevez
ce courriel par erreur, veuillez le supprimer immédiatement et envoyer sans délai Ã
l'expéditeur un message électronique pour l'aviser que vous avez éliminé de votre
ordinateur toute copie du courriel reçu.
|