[Veritas-bu] SAN Media server question
2007-06-26 12:16:46
Guys running Netbackup 5.0Mp7 on solaris 9 environment.
I have a master server connected to L700 via fibre through a SANBOX2
switch to robot and 6 drives.
The master server has 2 HBA's ( as i believe Sun impose a limit of 3 *
LTO2 drives per 2GB HBA ).
I have 2 SAN Media servers ( DB nodes ) each connected via the switch to
the first 3 drives which are shared.
I am adding 2 extra drives and another SAN Media server.
Question is :-
Using robtest i will see the extra drives in the L700 once added but i
cant add these drives to the Master server as i have already hit my
limit of drives / HBA. The new media server will be connected through
the switch to the 2 new drives and will have the devices set up. The
query i have is how does the master server ( which is the robot
controller ) able to put the tapes into the drives for use with the 3rd
Media server? As i wont have the devices and thus /dev/sg paths set up
for these new drives on the master. Im unclear as to how this will work.
Anyone any ideas? I cant see anything in the docs from the scan through
i have had
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] SAN Media server question,
Dave Markham <=
|
|
|