I've got confirmation from both SUN and Symantec that The Sun StorEdge 5320 
running 4.20 M0 will allow SSO both via Remote NDMP (thru the Media Server) and 
Direct Attached.  I'm still a bit sceptical, because it hasn't worked yet, but 
I've got a fair amount of confidence that when Sun & Symantec say something 
works, it will.  I'll have it up and running next week and I'll confirm one way 
or another.

-Jonathan
 

-----Original Message-----
From: misha.pavlov at sgcib.com [mailto:misha.pavlov at sgcib.com] 
Sent: Thursday, April 26, 2007 3:59 PM
To: Martin, Jonathan (Contractor)
Cc: veritas-bu at mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] NDMP and SSO in NetBackup 6.0 [NC]

Why not ? 
STK loves NT ... I'm sure it is a Dell box with Enginio controllers ...
If you want to use shared ( SSO ) drives - confirm with STK/SUN if the NDMP 
version it runs supports SCSI Reserve/Release  and of course as was mentioned 
yearlier today, NetBackup have to be version 6.


Regards.

--
Misha Pavlov
Soci?t? G?n?rale
desk: (212) 278-6096
cell: (646) 346-9341

This message uses only 100% recycled electrons.



"Martin, Jonathan \(Contractor\)" <JMARTI05 at intersil.com> Sent by: 
veritas-bu-bounces at mailman.eng.auburn.edu
04/26/2007 03:07 PM


To
"Mike Heck" <mike_heck at symantec.com>, <veritas-bu at mailman.eng.auburn.edu>
cc

Subject
Re: [Veritas-bu] NDMP and SSO in NetBackup 6.0






Ok... Just a point of clarification here...

I was under the assumption that if I had 4 fiber drives in library
shared with 2 media servers via SSO that I could also share one of those
drives with an NDMP NAS, namely a Sun StorEdge 5320.  Is this not the
case?

Just to clarify, when it comes NDMP backup time I want the Sun StorEdge
to allocate one of the SSO drives and write its data to it while sending
metadata to one of the media servers.  Is that not gonna happen?

-Jonathan



-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of Mike
Heck
Sent: Thursday, April 26, 2007 1:56 PM
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] NDMP and SSO in NetBackup 6.0

Rongsheng,

NDPM and SSO works very similar to normal SSO with NetBackup. 

What I would do is configure the Windows and UNIX hosts to share the
drives first, then configure access to the NDMP Host (Celerra NAS), then
finally modify the drives to include the NDMP path to the drives. 

You can then set up an NDMP storage Unit, and start backing up.

However I feel the need to advise you that not all versions of all
filers are compatible with SSO, this is mainly due the way reserve and
release are handled in some versions of some manufacturers Filer OS.
Please check the support.veritas.com web site, compatibility list for
NDMP to verify that your Filers OS is compatible.

Thank you,
Mike Heck

_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*************************************************************************
This message and any attachments (the "message") are confidential and
intended solely for the addressees.
Any unauthorised use or dissemination is prohibited. 
E-mails are susceptible to alteration.   
Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates 
shall be liable for the message if altered, changed or falsified. 

*************************************************************************