Sounds like you might have to rebuild your sgdrivers.
 

>From /driver folder

 

Do a ../sg.build all -mt 10 -ml

 

Rename the sg.conf in the /kernel/drv folder

 

Then do ./sg.install

 

http://saifulaziz.wordpress.com/2006/12/18/how-to-configure-drive-on-solaris-for-veritas-netbackup-4/

 

 
 
Greg 

________________________________

From: veritas-bu-bounces at mailman.eng.auburn.edu [mailto:veritas-bu-bounces 
at mailman.eng.auburn.edu] On Behalf Of Asiye Yigit
Sent: Wednesday, April 04, 2007 6:23 AM
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] os sees the drives;netbackup does not see the drives with 
sgscan



Hi All,

I have two tape drives connected to HBA as direct-to-direct. OS sees the drives 
with cfgadm -al and tape drives are also seen under /dev/rmt. However, sgscan 
returns entry only internal disks and internal tape drives. What is that I am 
missing. Solaris version is 10. NB version is 5.1 MP5. 

 

Regards,

Asiye

 

>>> This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for the
addressee.  If you are not the intended recipient, do not use the information
in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20070404/42886bb7/attachment.htm