[Veritas-bu] Master server with more than one network interface
2007-01-16 10:34:18
Subject: |
[Veritas-bu] Master server with more than one network interface |
From: |
yusuf.gedikoglu at gantek.com (Yusuf Gedikoglu) |
Date: |
Tue, 16 Jan 2007 17:34:18 +0200 |
Hi
I need your helps.
I tired to install NB 6.0 MP4 on solaris 10 master server. Master server have 5
network interface and we want to backup a subnet from a network interface. I
have 5 different subnets.
I set different ip for each interface and then connect it to the each subnet
switch.
such as
ce 0 11.200 network access ip and i installed master server with this ip
ce 1 is 40.42 and connect to the 40.xxx subnet
ce 2 is 41.62 and connect to the 41.xxx subnet
I set master serverp bp.conf file
SERVER=netbackup
SERVER=netbackup_40
SERVER=netbackup_41
and on the client bp.conf file have the same entries also. clients /etc/hosts
file is
...40.42 netbackup_40 netbackup
bpclntcmd command resolve and there is no communication problem
But when i run a backup job it gives status 23 and 24 error codes. And in the
client bpcd log file i see that it tried to connect 11.200 which i used for
netbackup installation.
16:42:16.082 [15605] <16> bpcd main: Couldn't get peer hostname
16:42:16.232 [15607] <2> bpcd main: offset to GMT -7200
16:42:16.232 [15607] <2> logconnections: BPCD ACCEPT FROM 172.26.11.200.35470
TO 172.26.1
0.197.13724
16:42:16.233 [15607] <2> bpcd main: setup_sockopts complete
16:42:16.246 [15607] <8> bpcd peer_hostname: gethostbyaddr failed :
HOST_NOT_FOUND (1)
16:42:16.246 [15607] <16> bpcd peer_hostname: gethostbyaddr failed to return
peer host, h
errno = 1
Is there a solution for this kind configuration.
Best regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20070116/adec42bd/attachment.html
|
|
|