I have never actually tried this, but you might try putting a SCRATCH_POOL = 
entry in /usr/openv/volmgr/vm.conf on the new media server.

Regards,

Patrick Whelan
NetBackup Specialist
Architect & Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niem?ller

-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu [mailto:veritas-bu-bounces 
at mailman.eng.auburn.edu] On Behalf Of Deiter Scott
Sent: 07 December 2006 13:12
To: Veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] New Media Server


 We have installed a new media server with a two drive robot at a remote
site to replace two stand alone drives and the old media server.

We want to setup 4 volume pools including a  scratch pool at the remote
site.
It appears that these pools must be defined at the new media server as I
have not been able to create another scratch pool in our existing
master/media.

Current version is 5.1 mp4
The master/media is solaris
The new media server is solaris
The remote site has window clients.

I'm wondering what else to look for when creating this new setup.




Scott Deiter
System Administrator
Hanover Direct, Inc.     
Hanover, PA         
Voice: 717-633-3298
Fax: 717-633-3101

_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*************************************************************************************
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing security at 
colt.net and delete the message and any attachments without retaining any 
copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates ("COLT") and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.