Veritas-bu

[Veritas-bu] Weird 52 error becuase it positions tape

2006-12-04 17:56:02
Subject: [Veritas-bu] Weird 52 error becuase it positions tape
From: HallC at SEC.GOV (Hall, Christian N.)
Date: Mon, 4 Dec 2006 17:56:02 -0500
 What do your logs say under /usr/openv/volmg/debug/* as well as
/var/adm/messages? What does your master's tpautconf -t, and
/usr/openv/volmgr/bin/scan say? Are the serial numbers in sync? What
about the duplex on the media server interface half/full, and can you do
a forward and reverse lookup from the media server to the master?  

-Chris 

-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of Joe
Royer
Sent: Monday, December 04, 2006 5:29 PM
To: veritas-bu at mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Weird 52 error becuase it positions tape

Sounds like a reservation conflict.  If you are using a scsi-fibre
bridge, login to the bridge and see what the logs say, or try and see
what it looks like while it's waiting.  Sorry I don't have anything
solid to suggest (Media mount timeout?), it's been a while since I
played with SSO.


----Original message----
Date: Fri, 01 Dec 2006 14:41:39 +0000
From: Dave Markham <dave.markham at fjserv.net>
Subject: [Veritas-bu] Weird 52 error becuase it positions tape

Netbackup 5.0mp4 on Solaris 9 attached to an L700.

I have a media manager which is connected to shared drives running SSO
on an L700. All drives are up and visible.
I kick a job off and it finds tapes, puts them in and start to position
them but then times out and gives status 52.

I have tried freezing the tapes so it uses different tapes.

vmdareq on the master shows the media has reserved 2 of the drives, and
the tapes are actually being put into drives as i can see under robtest
and 's d'.

Any 52 ive ever had before has been not able to see drives, drives down
or the processes not running. Anyone any other ideas where to look?

Cant see anything obvious in bptm log on the media server. Occasionally
theres an "unable to lock media offset" something error but the rest all
looks ok.

Dave


--
Joe Royer / SysAdmin / Digital Motorworks / 512-692-1028


This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system.
_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu