Hi all,
Since hardware support and Veritas support seem to be getting nowhere on
my problem, thought I'd hit the DL up to see if anyone's run into this
problem before.
 
Here's the environment:

*       1 Wintel Master, 3 Wintel + 3 Solaris media servers(5.1 MP5)
*       SSO, all LTO3 drives visible to all master/media, a single HP
ESL712e
*       No firewalls set up between any of these

Here's the problem:

*       Catalog is fully browsable.
*       Backups can be queued manually or scheduled, and run fine in the
environment.
*       When submitting a restore (from either a workstation or straight
from the master itself, both of which worked perfectly fine up until
now, and no changes have been made in the environment),  the GUI hangs
up,  takes over 10 minutes to submit, and report back asking that the
restore has been submitting successfully and if I want to see its
progress.
*       At this point the restore appears in the Activity Monitor and
stays in a queued state (for sometimes up to 30 minutes) and then
reports back with an SC 42 (network read failed).

I've checked my hardware, switch, application and system logs, and
nothing really stands out.  Probably something out there buried in my
Veritas logs, but support hasn't been able to tell me anything in over 3
days now (plus a weekend).
 
Any insight out there?  I'd appreciate it!
 
Thanks,
Jon
 
     This message may contain privileged and/or confidential information.  If 
you have received this e-mail in error or are not the intended recipient, you 
may not use, copy, disseminate or distribute it; do not open any attachments, 
delete it immediately from your system and notify the sender promptly by e-mail 
that you have done so.  Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20061023/81524ade/attachment.html