Veritas-bu

[Veritas-bu] NOM Hardware Requirements

2006-10-15 19:36:31
Subject: [Veritas-bu] NOM Hardware Requirements
From: Tim.Wilkinson at dsto.defence.gov.au (Wilkinson, Tim)
Date: Mon, 16 Oct 2006 09:36:31 +1000
We were advised to use at least 2GB RAM with 2 good processors. It's
hard to know how much disk space you'll need (depends on how many
reports you keep, and how many servers you're monitoring, etc.) but I
don't think 5GB will be enough. We've got 400GB+, just in case (will
probably never need that much but it means it is 'future-proofed'. I
asked Symantec and they said 30GB should be fine for a while in our
environment.
We're using a dedicated server as this has been recommended;
specifically Windows for NOM apparently, although it can run on other
platforms.
The NOM guides don't give too much information about this stuff but it's
a resource hungry beast.

Cheers,

Tim

-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of Justin
Piszcz
Sent: Friday, 13 October 2006 10:36 PM
To: "Koster, Phil"
Cc: veritas-bu
Subject: Re: [Veritas-bu] NOM Hardware Requirements

$ du -sh *NOM*
234M    NB_60_NOM.tar.gz

The program itself is big, you need to install ICS, setup
tunnel/authentication/brokering etc..  I remember the patches were
50-250MB as well, which I thought was crazy.  I had set this up 4-5
months ago for test purposes and I do not recall the exact amount of
memory; however, I do remember there were a lot of processes in use, the
ICS stuff, a number of webserver-like applications for NOM, etc..

Perhaps someone on the list who is -currently- using NOM can shed some
light on this?

Thanks,

Justin.

On Fri, 13 Oct 2006, "Koster, Phil" wrote:

> My intention was on Linux but in this case I guess I will have to go
Windows.
> 
> What kind of RAM and HDD was this thing using?  GB of RAM and 5 GB
HDD?  More?  We are going to use VMWare/ESX 2.5 and I would rather get
this thing sized right to start with.
> 
> Thanks.
> 
> Phil
> 456-3136
> 
> -----Original Message-----
> From: Justin Piszcz [mailto:jpiszcz at lucidpixels.com]
> Sent: Friday, October 13, 2006 8:08 AM
> To: Koster, Phil
> Cc: veritas-bu
> Subject: Re: [Veritas-bu] NOM Hardware Requirements
> 
> Unless you meant running the application within Windows within VMWare 
> or
> similar-- I installed it once on a Windows Server box, it was a big
hog IMO for memory/disk space.
> 
> On Fri, 13 Oct 2006, Justin Piszcz wrote:
> 
> > NOM requires Solaris or Windows server, it is not supported on any 
> > other platform.
> > 
> > On Fri, 13 Oct 2006, "Koster, Phil" wrote:
> > 
> > > We are getting ready to put NOM in a Linux VM.  Can anyone give me

> > > some idea as to what kind of resources this needs?  Specifically 
> > > looking for RAM and HDD space requirements.  I looked at the NOM 
> > > getting started guide, Admin guide for Windows vol I & II,  and 
> > > all I could find were common sense things like a "reliable
server".
> > > 
> > > Thanks.
> > > 
> > > Phil Koster
> > > Network Administrator
> > > City of Grand Rapids
> > > Direct: 616-456-3136
> > > Helpdesk: 456-3999
> > > 
> > > 
> > 
> 
_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu