jonathan
What steps did you take to do this via the GUI ? sorry I could not find your
Email !
 
 

Regards

Simon Weaver
3rd Line Technical Support
Windows Domain Administrator 

EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU

Email:  <mailto:Simon.Weaver at Astrium-eads.net> Simon.Weaver at 
Astrium-eads.net

-----Original Message-----
From: Martin, Jonathan (Contractor) [mailto:JMARTI05 at intersil.com] 
Sent: 09 August 2006 14:33
To: jakub.bielecki at comtegra.pl
Cc: Chris.Romano at lazard.com; veritas-bu at mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] tape drive serial number changed when drivefailed
- what do I do?


Windows 2000 5.1 MP4 environment here and it's worked every time.
 
-Jonathan

  _____  

From: jakub.bielecki at comtegra.pl [mailto:jakub.bielecki at comtegra.pl] 
Sent: Wednesday, August 09, 2006 3:17 AM
To: Martin, Jonathan (Contractor)
Cc: Chris.Romano at Lazard.com; veritas-bu at mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] tape drive serial number changed when drive failed
- what do I do?



This procedure didn't work last time I checked (5.1), because browse button
didn't update serial number. 
Usually I delete a drive in GUI and then add a new one with the same
parameters. If it's a shared drive a little more work is needed. 

In 6.0 there is a command utility for replacing a drive, but I can't
remember the name. 

pozdrawiam serdecznie
Jakub Bielecki

-- 
__________________________________________
Jakub.Bielecki at comtegra.pl
Comtegra Sp. z o.o.    http://www.comtegra.pl
ul. Nakielska 3, 01-106 Warsaw, Poland





        "Martin, Jonathan \(Contractor\)" <JMARTI05 at intersil.com> 
Sent by: veritas-bu-bounces at mailman.eng.auburn.edu 


2006-08-08 23:17 

        
        To:        <Chris.Romano at Lazard.com>,
<veritas-bu at mailman.eng.auburn.edu> 
        cc:         
        Subject:        Re: [Veritas-bu] tape drive serial number changed
when drive failed        - what do I do?        



I use the GUI in Windows... Goto Devices --> Robot --> Drives.  Select
the drive you replaced and goto properties.  Then "browse" for the new
drive and serial.

Not sure if this works for other OS or SSO etc etc..

-Jonathan 

-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of
Chris.Romano at Lazard.com
Sent: Tuesday, August 08, 2006 4:28 PM
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] tape drive serial number changed when drive failed
- what do I do?

Hi...

Does anyone know the procedure to follow when a tape drive is
replaced...how do I tell Netbackup about the new serial number?



Thanks,
Chris Romano


_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu





This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate or 
otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of Astrium 
Limited.
Nothing in this email shall bind Astrium Limited in any contract or obligation.

Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060809/889ef58e/attachment-0001.html