We run a IBM3584 tape library with 16 lto2 drives.  Our IBM SE upgraded
the firmware to the 5AT0 version and we started having SCSI errors on
the Solaris machines as well as 84 errors in Netbackup.

We downgraded and the 84 errors went away.

Jimmy Allen
jballen at firstam.com

-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of Eagle,
Kent
Sent: Thursday, June 29, 2006 7:48 AM
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] Status 84 errors after ADIC i2000 upgraded to i4
firmware

Greetings,

Has anyone else experience Status 84 errors after upgrading the firmware
on their ADIC i2000 to i4 (4.4.2 or 4.3.x)? We didn't have the problem
on i3, and it went away when we downgraded the version.

The other half of this equation is that along with the robot firmware,
our IBM LTO2 drives firmware were upgraded from 4AP0 to 5AT0. We
downgraded the drive firmware along with the robot firmware.

Regards,

Kent C. Eagle
Systems Engineer, MCP, MCSE
Tech Services / SMSS
keagle at wilmingtontrust.com
 


Visit our website at www.wilmingtontrust.com

Investment products are not insured by the FDIC or any other
governmental agency, are not deposits of or other obligations of or
guaranteed by Wilmington Trust or any other bank or entity, and are
subject to risks, including a possible loss of the principal amount
invested. This e-mail and any files transmitted with it may contain
confidential and/or proprietary information.  It is intended solely for
the use of the individual or entity who is the intended recipient.
Unauthorized use of this information is prohibited.  If you have
received this in error, please contact the sender by replying to this
message and delete this material from any system it may be on.


_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu