Veritas-bu

[Veritas-bu] Ports Question

2006-06-14 14:55:05
Subject: [Veritas-bu] Ports Question
From: brooksje at longwood.edu (Brooks, Jason)
Date: Wed, 14 Jun 2006 14:55:05 -0400
Well, that didn't quite do the trick.  So, I've opened a case after
additionally opening 1556, both tcp and udp.

Jason

> -----Original Message-----
> From: veritas-bu-bounces at mailman.eng.auburn.edu 
> [mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf 
> Of Brooks, Jason
> Sent: Wednesday, June 14, 2006 10:18 AM
> To: dave.markham at fjserv.net
> Cc: veritas-bu at mailman.eng.auburn.edu
> Subject: Re: [Veritas-bu] Ports Question
> 
> Yep, vnetd has been running fine and happy since October, last year.
> We'll give that a whirl.
> 
> Thanks,
> Jason 
> 
> > -----Original Message-----
> > From: veritas-bu-bounces at mailman.eng.auburn.edu
> > [mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On 
> Behalf Of Dave 
> > Markham
> > Sent: Wednesday, June 14, 2006 10:16 AM
> > To: Brooks, Jason
> > Cc: veritas-bu at mailman.eng.auburn.edu
> > Subject: Re: [Veritas-bu] Ports Question
> > 
> > Assuming you have enabled VNETD correctly which i assume 
> you have with 
> > having port 137824 open, try opening 13782 also.
> > 
> > Cheers
> > 
> > Brooks, Jason wrote:
> > > Hopefully and easy one, but I've been unable to verify as of yet.
> > >
> > > I'm working on backing up a pair of Linux boxes through a
> > Cisco Load
> > > Balancer.  I've worked with our Networking group and have 
> the bare 
> > > essentials to get things working.  We've opened up 13724 to the 
> > > virtual IP for both the Master Server and the Media server,
> > which has
> > > enabled a backup to run.  Here, however, is the oddity.  When the 
> > > backup runs, via a policy that has ALL_LOCAL_DRIVES
> > directive, I only
> > > have a child process for the / filesystem.  I know there
> > are more out
> > > there.  I've tried manually specifying a file system, but 
> I cannot 
> > > connect to the client.  Neither can I connect to the 
> client in the 
> > > Host
> > > Properties->Clients interface.  What other ports are 
> required to get
> > > this working?  PBX?  Others?
> > >
> > > Thanks,
> > > Jason
> > >
> > > ------------
> > > Jason Brooks
> > > Computer Systems Engineer
> > > IITS - Longwood University
> > > voice - (434) 395-2916
> > > fax - (434) 395-2035
> > > mailto:<brooksje at longwood.edu>
> > >
> > > _______________________________________________
> > > Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu 
> > > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > >
> > >   
> > 
> > _______________________________________________
> > Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu 
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > 
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu 
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 


<Prev in Thread] Current Thread [Next in Thread>