Veritas-bu

[Veritas-bu] Ports Question

2006-06-14 10:15:31
Subject: [Veritas-bu] Ports Question
From: dave.markham at fjserv.net (Dave Markham)
Date: Wed, 14 Jun 2006 15:15:31 +0100
Assuming you have enabled VNETD correctly which i assume you have with
having port 137824 open, try opening 13782 also.

Cheers

Brooks, Jason wrote:
> Hopefully and easy one, but I've been unable to verify as of yet.
>
> I'm working on backing up a pair of Linux boxes through a Cisco Load
> Balancer.  I've worked with our Networking group and have the bare
> essentials to get things working.  We've opened up 13724 to the virtual
> IP for both the Master Server and the Media server, which has enabled a
> backup to run.  Here, however, is the oddity.  When the backup runs, via
> a policy that has ALL_LOCAL_DRIVES directive, I only have a child
> process for the / filesystem.  I know there are more out there.  I've
> tried manually specifying a file system, but I cannot connect to the
> client.  Neither can I connect to the client in the Host
> Properties->Clients interface.  What other ports are required to get
> this working?  PBX?  Others?
>
> Thanks,
> Jason
>
> ------------
> Jason Brooks
> Computer Systems Engineer
> IITS - Longwood University
> voice - (434) 395-2916
> fax - (434) 395-2035
> mailto:<brooksje at longwood.edu> 
>
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>   


<Prev in Thread] Current Thread [Next in Thread>