Small 2 node config. 1 master, 1 meda.
Media has 1 L500 tape library w/ 1 DLT drive.

Solaris 9 112233-07 NBU 6.0 MP2

ltid fails to start on the media server though the library/drive are configured 
and visible via tpconfig and sgscan.
The ltid log file displays the following cryptic message at the time of exit:

17:14:33.095 [28444] <16> emmlib_UpdateHostEx: (0) UpdateMachine failed, 
emmError = 4000002, nbError = 0
17:14:33.095 [28444] <16> AddAndVerifyHost: Failed to update this host.  EMM 
error code = 4000002
17:14:33.117 [28444] <16> AddAndVerifyHost: (-) Translating 
EMM_ERROR_ArgInvalid(4000002) to 191 in the Media context
17:14:33.120 [28444] <3> logstderrmsg: Failed to validate this host with the 
EMM server
17:14:35.260 [28444] <4> TermLtid: chmod dev files


Using the wizard from the master (new install): Device Configuration.
It scans the media server, discovers the robot and drive, prompts if I want to 
commit the changes, then reponds with "Restarting Device Daemon". After a 
while, that same message gets prefaced with a yellow exclamation mark, but no 
further explanation. The changes are never committed and you are back to the 
beginning again. 

The only evidence of failure is the snippet from the log file above. At least 
of where I know to look in 6.0. 

Any takers on this?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060523/ee52f931/attachment.html