Hi Gurus,
We could not take backup to the L25 on sun box. In fact, during the
device configuration wizard, everything seems to be okay. However, when
we start any backup, the job hags. The following messages are the in the
messages file. There is also I/O error in bptm log. We think there is hw
problem. What do you suggest?

Regards,


May 17 17:22:49 bcksrv avrd[2594]: [ID 533245 daemon.notice] st.conf
configuration for HPUltrium3-SCSI3 (device 3), name [HP Ultrium LTO 3],
vid [HP      Ultrium 3*], type 0x3b, block size 0, options 0x18619 (see
st(7D) man page)
May 17 17:22:49 bcksrv tldd[2586]: [ID 947741 daemon.error] TLD(1) going
to UP state
May 17 17:29:50 bcksrv qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(0):
Link OFFLINE
May 17 17:29:53 bcksrv qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(0):
Link ONLINE
May 17 17:29:53 bcksrv bptm[2851]: [ID 832037 daemon.error] scsi command
failed, may be timeout, scsi_pkt.us_reason = 6
May 17 17:29:53 bcksrv qlc: [ID 557240 kern.warning] WARNING: qlc(0) no
loop_id for adisc 12000h
May 17 17:29:53 bcksrv fp: [ID 517869 kern.info] NOTICE: fp(0): ADISC to
12000 failed, cmd_flags=1 state=Packet Transport error, reason=No
Connection
May 17 17:29:53 bcksrv qlc: [ID 557240 kern.warning] WARNING: qlc(0) no
loop_id for adisc 12100h
May 17 17:29:53 bcksrv fctl: [ID 517869 kern.warning] WARNING:
122=>fp(0)::fp_adisc_intr: Dev change notification to ULP
port=30000529000, pd=3000116fa10, map_flags=0 map_state=1
May 17 17:29:53 bcksrv fp: [ID 517869 kern.info] NOTICE: fp(0): ADISC to
12100 failed, cmd_flags=1 state=Packet Transport error, reason=No
Connection
May 17 17:29:53 bcksrv fctl: [ID 517869 kern.warning] WARNING:
125=>fp(0)::fp_adisc_intr: Dev change notification to ULP
port=30000529000, pd=3000116f810, map_flags=0 map_state=1