[Veritas-bu] ADIC i2000 Scaler Robot and LTO3 Drives
2006-04-18 04:58:23
Diane
Can Netbackup see the tapes and the robot ok? Any errors logged?
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: Simon.Weaver AT Astrium-eads DOT net
-----Original Message-----
From: Diane Marcotte [mailto:ladydi AT virginia DOT edu]
Sent: 13 April 2006 14:22
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] ADIC i2000 Scaler Robot and LTO3 Drives
We tried to get our ADIC i2000 Scaler robot to work with NetBAckup 6.0. We
got fairly far in this test. The problem we ran into was when the backups
ran we failed with the message, no passthru access to this drive.
Has anyone run into this issue? Thanks, Diane
Diane Marcotte
University of Virginia
434-924-4182
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate or
otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or
obligation.
EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England
|
|
|