|
[Veritas-bu] **** Assistance Plz ;-) *****
2005-09-27 11:15:09
This is a multi-part message in MIME format.
------_=_NextPart_001_01C5C376.40596BF4
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
I have seen this before many times. Sometimes it's a cluster and one
day the E:/ is on system1, the next, it's moved to system2, then the
backup for system1 will get Status error code of 71; none of files in
the file list exist for the E:/ drive backup.=20
=20
A scarey one was a new system that wasn't in DNS so I added to the host
files and had one number wrong in the IP. The master server had the
correct IP, the media server had the incorrect IP. It actually backed
up the wrong server which didn't contain one of the disks the right
server had. I don't know the programming behind this since I didn't
write NetBackup, but it knew about the disk and then went to the wrong
server to find it. Totally my fault but I would think there should be
some verification on the Media server of the hostname. I gues there
isn't.
________________________________
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
Mark.Donaldson AT cexp DOT com
Sent: Tuesday, September 27, 2005 9:01 AM
To: Ray.Hill AT ny.frb DOT org; veritas-bu-admin AT mailman.eng.auburn DOT edu;
veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] **** Assistance Plz ;-) *****
Could you post the "bppllist <policyname> -U" of this policy?
=20
-M
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of
Ray.Hill AT ny.frb DOT org
Sent: Tuesday, September 27, 2005 8:02 AM
To: veritas-bu-admin AT mailman.eng.auburn DOT edu;
veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] **** Assistance Plz ;-) *****
Importance: High
=09
=09
=09
__________________=20
=09
=09
=09
I have a master/media server; Solaris 2.8 64 bit running NBU
5.1 MP2.=20
=09
I received the following error:=20
=09
Status error code of 71; none of files in the file list exist.=20
The files in the file list did not match any of the files on the
client. This error can occur when there is only one file in the file
list and the file cannot be backed up due to an I/O error.=20
=09
=09
(1) The policy contains 4 clients=20
(2) Three of the clients contain all of the mount points to be
backed up.=20
/apps is not a mount point in one of the clients but is
a directory, but it is listed as a directory to be backed up.=20
(3) The one client which got the SC=3D71 only contain 4 of the
mount points.=20
/dev/dsk/c0t1d0s0 17038058 5021430 11846248 30%
/caps00=20
/dev/dsk/c0t1d0s1 17038058 9135123 7732555 55%
/caps01=20
/dev/dsk/c0t1d0s4 17038058 6713725 10153953 40%
/caps03=20
/dev/dsk/c0t1d0s3 17038058 109709 16757969 1%
/caps02=20
=09
=09
QUESTION: Why am I receiving this error condition; status code
of 71.=20
In NBU45 this did not kill the job.=20
=09
=09
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\=20
=09
=09
////////////////////////////////////////////////////////////////////////
/=20
This is df -k:=20
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\=20
/dev/vx/dsk/capshdg/caps03 16777216 1737566 14099685
11% /caps03=20
/dev/vx/dsk/capshdg/caps02 26214400 200872 24387751
1% /caps02=20
/dev/vx/dsk/capshdg/caps00 33554432 4101823 27619617
13% /caps00=20
/dev/vx/dsk/capshdg/caps01 16777216 2729268 13169956
18% /caps01=20
/dev/vx/dsk/dwdg/dw03 31457280 3174920 28061456
11% /dw03=20
/dev/vx/dsk/dwdg/dw01 31457280 3319792 27917672
11% /dw01=20
/dev/vx/dsk/dwdg/dw00 62914560 5013840 57451856
9% /dw00=20
/dev/vx/dsk/dwdg/dw02 62914560 2508832 59934240
5% /dw02
=09
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\=20
These are the NBU directory to backup:=20
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\=20
/caps03=20
/caps02=20
/caps00=20
/caps01=20
/dw03=20
/dw01=20
/dw00=20
/dw02=20
/apps=20
=09
////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////=20
=09
=09
Thanks in advance for any and all suggestions and solutions.=20
=09
=09
=09
=09
Ray H.
ext 8527
=09
*****************************************************************
Communication Is the Gateway between Ideas and Results
=09
*****************************************************************
------_=_NextPart_001_01C5C376.40596BF4
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<META content=3D"MSHTML 6.00.2900.2722" name=3DGENERATOR></HEAD>
<BODY>
<DIV dir=3Dltr align=3Dleft><SPAN class=3D062460515-27092005><FONT =
face=3DArial=20
color=3D#0000ff size=3D2>I have seen this before many times. =
Sometimes it's a=20
cluster and one day the E:/ is on system1, the next, it's moved to =
system2, then=20
the backup for system1 will get <FONT face=3D"Times New Roman" =
color=3D#000000=20
size=3D3>Status error code of 71; none of files in the file list exist =
for the E:/=20
drive backup. </FONT></FONT></SPAN></DIV>
<DIV dir=3Dltr align=3Dleft><SPAN =
class=3D062460515-27092005></SPAN> </DIV>
<DIV dir=3Dltr align=3Dleft><SPAN class=3D062460515-27092005><FONT =
face=3DArial=20
color=3D#0000ff size=3D2>A scarey one was a new system that wasn't in =
DNS so I added=20
to the host files and had one number wrong in the IP. The master =
server=20
had the correct IP, the media server had the incorrect IP. It =
actually=20
backed up the wrong server which didn't contain one of the disks the =
right=20
server had. I don't know the programming behind this since I =
didn't write=20
NetBackup, but it knew about the disk and then went to the wrong server =
to find=20
it. Totally my fault but I would think there should be some =
verification=20
on the Media server of the hostname. I gues there=20
isn't.</FONT></SPAN></DIV><BR>
<DIV class=3DOutlookMessageHeader lang=3Den-us dir=3Dltr align=3Dleft>
<HR tabIndex=3D-1>
<FONT face=3DTahoma size=3D2><B>From:</B> =
veritas-bu-admin AT mailman.eng.auburn DOT edu=20
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] <B>On Behalf Of=20
</B>Mark.Donaldson AT cexp DOT com<BR><B>Sent:</B> Tuesday, September 27, 2005 =
9:01=20
AM<BR><B>To:</B> Ray.Hill AT ny.frb DOT org; =
veritas-bu-admin AT mailman.eng.auburn DOT edu;=20
veritas-bu AT mailman.eng.auburn DOT edu<BR><B>Subject:</B> RE: [Veritas-bu] =
****=20
Assistance Plz ;-) *****<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV><SPAN class=3D673110015-27092005><FONT face=3DArial color=3D#0000ff =
size=3D2>Could=20
you post the "bppllist <policyname> -U" of this=20
policy?</FONT></SPAN></DIV>
<DIV><SPAN class=3D673110015-27092005><FONT face=3DArial color=3D#0000ff =
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D673110015-27092005><FONT face=3DArial color=3D#0000ff =
size=3D2>-M</FONT></SPAN></DIV>
<BLOCKQUOTE>
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma=20
size=3D2>-----Original Message-----<BR><B>From:</B>=20
veritas-bu-admin AT mailman.eng.auburn DOT edu=20
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]<B>On Behalf Of=20
</B>Ray.Hill AT ny.frb DOT org<BR><B>Sent:</B> Tuesday, September 27, 2005 =
8:02=20
AM<BR><B>To:</B> veritas-bu-admin AT mailman.eng.auburn DOT edu;=20
veritas-bu AT mailman.eng.auburn DOT edu<BR><B>Subject:</B> [Veritas-bu] ****
=
Assistance Plz ;-) *****<BR><B>Importance:</B>=20
High<BR><BR></FONT></DIV><BR><FONT face=3Dsans-serif=20
size=3D2><BR>__________________</FONT><FONT size=3D3> =
<BR><BR><BR></FONT><FONT=20
size=3D2><BR>I have a master/media server; Solaris 2.8 64 bit running =
NBU=20
5.1 MP2.</FONT><FONT size=3D3> <BR></FONT><BR><FONT face=3Dsans-serif =
size=3D2>I=20
received the following error:</FONT> <BR><FONT face=3Dsans-serif=20
size=3D2><BR></FONT><FONT size=3D3>Status error code of 71; none of =
files in the=20
file list exist.</FONT> <BR><FONT size=3D3>The files in the file list =
did not=20
match any of the files on the client. This error can occur when there =
is only=20
one file in the file list and the file cannot be backed up due to an =
I/O=20
error.</FONT> <BR><BR><BR><FONT size=3D3>(1) The policy contains 4=20
clients</FONT> <BR><FONT size=3D3>(2) Three of the clients contain all =
of the=20
mount points to be backed up.</FONT> <BR><FONT size=3D3> =
=20
/apps is not a mount point in one of the clients but is a =
directory,=20
but it is listed as a directory to be backed up.</FONT> <BR><FONT =
size=3D3>(3)=20
The one client which got the SC=3D71 only contain 4 of the mount =
points.</FONT>=20
<BR><FONT size=3D3> /dev/dsk/c0t1d0s0 =
=20
17038058 5021430 11846248 30% =
/caps00</FONT>=20
<BR><FONT size=3D3> /dev/dsk/c0t1d0s1 =
=20
17038058 9135123 7732555 55% =
/caps01</FONT>=20
<BR><FONT size=3D3> /dev/dsk/c0t1d0s4 =
=20
17038058 6713725 10153953 40% =
/caps03</FONT>=20
<BR><FONT size=3D3> /dev/dsk/c0t1d0s3 =
=20
17038058 109709 16757969 1% =20
/caps02</FONT> <BR><BR><BR><FONT size=3D3>QUESTION: Why =
am I=20
receiving this error condition; status code of 71.</FONT> <BR><FONT =
size=3D3>In=20
NBU45 this did not kill the job.</FONT> <BR><BR><FONT=20
=
size=3D3>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\=
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\=
\\\\\\\\\\\\\\\\</FONT>=20
<BR><BR><FONT=20
=
size=3D3>////////////////////////////////////////////////////////////////=
/////////</FONT>=20
<BR><FONT size=3D3>This is df -k:</FONT> <BR><FONT=20
size=3D3>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\</FONT> <BR><FONT=20
size=3D3>/dev/vx/dsk/capshdg/caps03 =
16777216 1737566=20
14099685 11% /caps03</FONT> <BR><FONT=20
size=3D3>/dev/vx/dsk/capshdg/caps02 =
26214400=20
200872 24387751 1% /caps02</FONT> =
<BR><FONT=20
size=3D3>/dev/vx/dsk/capshdg/caps00 =
33554432 4101823=20
27619617 13% /caps00</FONT> <BR><FONT=20
size=3D3>/dev/vx/dsk/capshdg/caps01 =
16777216 2729268=20
13169956 18% /caps01</FONT> <BR><FONT=20
size=3D3>/dev/vx/dsk/dwdg/dw03 =
=20
31457280 3174920 28061456 11% /dw03</FONT> =
<BR><FONT=20
size=3D3>/dev/vx/dsk/dwdg/dw01 =
=20
31457280 3319792 27917672 11% /dw01</FONT> =
<BR><FONT=20
size=3D3>/dev/vx/dsk/dwdg/dw00 =
=20
62914560 5013840 57451856 9% /dw00</FONT> =
<BR><FONT=20
size=3D3>/dev/vx/dsk/dwdg/dw02 =
=20
62914560 2508832 59934240 5% =
/dw02<BR></FONT><FONT=20
face=3Dsans-serif=20
=
size=3D2>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\=
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\</=
FONT>=20
<BR><FONT face=3Dsans-serif size=3D2>These are the NBU directory =
to=20
backup:</FONT> <BR><FONT face=3Dsans-serif=20
size=3D2>\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\</FONT> <BR><FONT=20
size=3D3> /caps03</FONT> <BR><FONT size=3D3> =
/caps02</FONT>=20
<BR><FONT size=3D3> /caps00</FONT> <BR><FONT size=3D3> =
/caps01</FONT>=20
<BR><FONT size=3D3> /dw03</FONT> <BR><FONT =
size=3D3> /dw01</FONT>=20
<BR><FONT size=3D3> /dw00</FONT> <BR><FONT =
size=3D3> /dw02</FONT>=20
<BR><FONT size=3D3>/apps</FONT> <BR><FONT face=3Dsans-serif=20
=
size=3D2>////////////////////////////////////////////////////////////////=
/////////////////////////////////////////////////////////////////////////=
//</FONT>=20
<BR><BR><FONT face=3Dsans-serif size=3D2><BR>Thanks in advance for any =
and all=20
suggestions and solutions.</FONT><FONT size=3D3> <BR><BR></FONT><FONT=20
size=3D2><BR></FONT><BR><FONT face=3Dsans-serif size=3D2><BR>Ray =
H.<BR>ext=20
=
8527<BR>*****************************************************************=
<BR>Communication=20
Is the Gateway between Ideas and=20
=
Results<BR>**************************************************************=
***</FONT></BLOCKQUOTE></BODY></HTML>
------_=_NextPart_001_01C5C376.40596BF4--
|
| <Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Veritas-bu] **** Assistance Plz ;-) *****, (continued)
|
|
|
