Veritas-bu

[Veritas-bu] Anyone got a st.conf entry for STK 9940B ? (was Tape Error -> Error for Command: space)

2005-09-20 11:57:19
Subject: [Veritas-bu] Anyone got a st.conf entry for STK 9940B ? (was Tape Error -> Error for Command: space)
From: richard_hellier AT hotmail DOT com (Richard Hellier)
Date: Tue, 20 Sep 2005 16:57:19 +0100
Folks,
        Does anyone have a st.conf entry for the STK STK 9940B drive,
please?  I think this will fix Mirko's problem.

Cheers,

Richard.


-----Original Message-----
From: ms_nbu AT mac DOT com [mailto:ms_nbu AT mac DOT com] 
Sent: 20 September 2005 11:05
To: Richard Hellier
Subject: RE: [Veritas-bu] Tape Error -> Error for Command: space

Richard,

good answer, thanks a lot! I'm using the default st.conf for my STK STK
9940B drives... 

The device configuration manual has a st.conf included that states the 9940B
as a 
60GB device which is not really correct as we use 200Gb cartridges... any
idea what to 
do? 

Thanks a lot! 


Take care, 

-- Mirko


 
On Tuesday, September 20, 2005, at 11:41AM, Richard Hellier
<richard_hellier AT hotmail DOT com> wrote:

>Mirko,
>       One thing to check -- do you have the correct descriptions of the
>tape devices in your "st.conf" file? If not, N/B may be thinking it can get
>more on the tape than is possible ...
>
>Good Luck!
>
>Richard.
>
>
>-----Original Message-----
>From: veritas-bu-admin AT mailman.eng.auburn DOT edu
>[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
ms_nbu AT mac DOT com
>Sent: 20 September 2005 07:54
>To: veritas-bu AT mailman.eng.auburn DOT edu
>Subject: [Veritas-bu] Tape Error -> Error for Command: space
>
>Hi there, 
>
>I've got a problem in my newly set up NetBackup 5.1 environment. Some
backup
>jobs failed with the following error:
>
>scsi: [ID 107833 kern.warning] WARNING:
>/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w500104f00077743e,0 (st25):
>Error for Command: space                   Error Level: Fatal
>scsi: [ID 107833 kern.notice]         Requested Block: 1
>Error Block: 1
>scsi: [ID 107833 kern.notice]         Vendor: STK
>Serial Number: .402        
>scsi: [ID 107833 kern.notice]         Sense Key: Media Error
>scsi: [ID 107833 kern.notice]         ASC: 0x0 (<vendor unique code 0x0>),
>ASCQ: 0x2, FRU: 0x0
>scsi: [ID 107833 kern.notice]         End-of-Media Detected
>
>Shouldn't NBU automatically detect end of media and select new media when
>appropriate? I'm sure I did something wrong, any ideas about it?
>
>Thanks a lot,
>
>-- Mirko
>
>_______________________________________________
>Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
>http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>


Herzliche Grüße,

Mirko Schlottke

----------------------------------------------------
-- Mirko Schlottke - IT-Consulting ---
- Waterloostr. 31 - 22769 Hamburg --
--- Phone +49 (0)40 43253868 --------
------ Cell +49 (0)175 1604033 ---------
-------- Fax +49 (0)40 43182524 -------
- info AT mirko-schlottke DOT de --------------
----------------------------------------------------


<Prev in Thread] Current Thread [Next in Thread>