May be you are running robtest from the wrong media server ...... (who's the
system that controll the robotics?)

Just try on each media server (master server incl)   tpconfig -data

DATASEC
Javier González
www.datasec.ch

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Daniel 
Suzuki
Sent: Montag, 20. Juni 2005 15:52
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Robtest not show TLD(0)

Hi Dears,

I´m  running NBU Master (5.1 MP2) on AIX 5.2 connected to an library STK
L700 with 20 tapes LTO2. I'm not use ACSLS.
All configuration the devices this OK,  including the device passthru for
control robotic.
I'm making the inventory of library and backup normally, but, when I'm using
the command robtest the robot not show.
Somebody already had this problem?

Regards, 

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu