FWIW, I have a Dell PV132T in through the built in SNC, the devices are
on Lun 4-6.... You might try using sg.build all -mt 15 -ml 7.
HTH
-Tim
On May 27, 2005, at 11:22 AM, Francisco Puente wrote:
> Hello list,
> Here my configuration:
> SunFire 6800
> ADIC Scalar 100 connected via SCSI, 50 slots, 2 SONYSDX-700C drives.
> Netbackup 4.5 MP6 and FP6 installed.
> Solaris 8
>
> We've got a new Dell PV132T LTO2 robot to be added, with 2 drives and
> 24 slots.
> I've got the OS to recognize both new tape drives but I can't get the
> system to recognize the robotic arm.
> From the output of the sgscan I see only the ADIC connected.
> I ran the procedure to add a new robot from the doc.
>
>
> /usr/sbin/modinfo | grep sg
>
> /usr/sbin/rem_drv sg
>
> /usr/bin/rm -f /kernel/drv/sg.conf
>
> /usr/openv/volmgr/bin/driver/sg.install
>
> cd /usr/openv/volmgr/bin/driver
>
> /usr/openv/volmgr/bin/sg.build all -mt 15 -ml 1
>
> and added/replaced content on
>
>
> /kernel/drv/st.conf
>
> reboot -- -r
>
> We connected the robot to windows 2k3 server and it works fine under
> BackupExec, but I can't get it working under Solaris 8.
>
> Any help will be very welcome!
>
> Thanks!
>
>
>
> Francisco
|