Veritas-bu

[Veritas-bu] How to use the scratch pool

2005-04-29 11:24:02
Subject: [Veritas-bu] How to use the scratch pool
From: Bill_Jorgensen AT csgsystems DOT com (Jorgensen, Bill)
Date: Fri, 29 Apr 2005 09:24:02 -0600
Scott:

To piggy back on Tim's response you will have to manually (or by script)
reassign newly injected tapes to the Scratch pool until all the tapes
have started there. Once they have been assigned to the Scratch pool and
then are used by a policy they will return to the Scratch pool when the
images expire on the cartridge. The tedious part of migrating to that is
the manual reassigning you need to do. Once you have that pool created
and working it makes life so much easier.

HTH,

Bill

--------------------------------------------------------
     Bill Jorgensen
     CSG Systems, Inc.
     (w) 303.200.3282
     (p) 303.947.9733
--------------------------------------------------------
     UNIX... Spoken with hushed and
     reverent tones.
--------------------------------------------------------

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Deiter
Scott
Sent: Wednesday, April 27, 2005 1:37 PM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: [Veritas-bu] How to use the scratch pool

When our tapes expire(the images) the tapes are marked as available.
However, this happens in each volume pool.  The problem has come up
because
we
have overgrown our 88 slot robot.  now we must do a manual robot
stuffing
every friday with the correct number from each pool before our weekend
backups. 
How can we get all the volume pools to send their expired volumes to the
scratch pool?



>From    Scott Deiter 
        Hanover Direct, Inc. 
        Tech services 
        (717) 633-3298 
        scottd AT hanoverdirect DOT com 
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu