Veritas-bu

[Veritas-bu] scheduler exiting - no storage units available f or use (213)

2005-01-31 10:33:45
Subject: [Veritas-bu] scheduler exiting - no storage units available f or use (213)
From: ChrisCosta AT tdwaterhouse DOT com (ChrisCosta AT tdwaterhouse DOT com)
Date: Mon, 31 Jan 2005 10:33:45 -0500
I would delete and recreate your storage device configurations on your media
servers.  Then run some backup jobs

Chris

-----Original Message-----
From: Preece, Sue [mailto:spreece AT herefordshire.gov DOT uk] 
Sent: Monday, January 31, 2005 9:45 AM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: [Veritas-bu] scheduler exiting - no storage units available for use
(213)

We've recently upgraded from Netbackup BusinesServer version 4.5GA to
Enterprise Server verision 5.1.

We've tried running backup jobs but get the following error each time.

the required storage unit is unavailable(219)

When i check the bpsched log it gives the following error
scheduler exiting - no storage units available for use (213)

We've checked the configuraiton of the storage unit and it look Ok apart
from there being nothing under the 'number of drives' column. Both tape
drives are there and are UP.

Any help would be appreciated.

Thanks
Sue

Any opinion expressed in this e-mail or any attached files are those of
the individual and not necessarily those of Herefordshire Council.

This e-mail and any attached files are confidential and intended solely
for the use of the addressee.  This communication may contain material
protected by law from being passed on.  If you are not the intended
recipient and have received this e-mail in error, you are advised that
any use, dissemination, forwarding, printing or copying of this e-mail
is strictly prohibited.  If you have received this e-mail in error
please contact the sender immediately and destroy all copies of it

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

<Prev in Thread] Current Thread [Next in Thread>