Hello,
Is anyone out there using an AIX robot control host?
We're trying to configure our first AIX box as a robot control host and media
server in our
NetBackup 4.5 MP6 environment.
We are trying to get the AIX box to work with an EMC CDL (Clarrion Disk Library)
that's
emulating an STK L700 tape library.
We have Sun robot control hosts, but no IBM, so we don't know exactly what
devices
we should expect to see out there in AIX that will allow us to control the
"L700".
I've installed the ovpass driver per the installation guide, but then when I run
"cfgmgr -v"
on the box to update the devices, it tells me:
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.fcp.changer
And no library control device gets created (At least not any we can identify.)
IBM says they don't
provide any fileset called "devices.fcp.changer", and suggested that I install
the Atape driver - which
I've done, to no avail.
We do see the 20 drives out there, just no device for the robot/library itself.
Any help will be GREATLY appreciated!
Thanks,
Jay Sherman
This e-mail, including attachments, may include confidential and/or
proprietary information, and may be used only by the person or entity to
which it is addressed. If the reader of this e-mail is not the intended
recipient or his or her authorized agent, the reader is hereby notified
that any dissemination, distribution or copying of this e-mail is
prohibited. If you have received this e-mail in error, please notify the
sender by replying to this message and delete this e-mail immediately.
|