This is a multi-part message in MIME format.

--Boundary_(ID_fnW/kA/+LJL4wiYnZkoavw)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT

Hi Jeff,

have a look at both documents....

Hope, this helps!

Cheers,
Gunter

Schmitz, Jeff wrote:
> 
> 
> Has anyone out there had to change the hostname on a Solaris Master
> server? Any gotcha's?
> Is there a procedure out there somewhere??
> 
> thanks!!
> 
> Jeffery
> 


--Boundary_(ID_fnW/kA/+LJL4wiYnZkoavw)
Content-type: text/plain; name=Change_Nodename-Hostname_v01
Content-transfer-encoding: 7BIT
Content-disposition: inline; filename=Change_Nodename-Hostname_v01


Erstellt:       18.10.2004
Angepasst:      18.10.2004
Autor:          gma AT sun DOT com
Thema:          Der Nodename oder Hostname eines Servers soll geaendert werden
Filename:       Change_Nodename-Hostname_v01


How to change hostname by edit files

************************************


To change the hostname, edit the following files...

/etc/nodename
/etc/hosts
/etc/hostname.<interfacename>   # Example: hme0, gfe0, eri0, ce0, etc.
/etc/net/ticlts/hosts
/etc/net/ticots/hosts
/etc/net/ticotsord/hosts



--Boundary_(ID_fnW/kA/+LJL4wiYnZkoavw)
Content-type: text/plain; name=NBU_server_nodename-change_v01.txt
Content-transfer-encoding: QUOTED-PRINTABLE
Content-disposition: inline; filename=NBU_server_nodename-change_v01.txt

Vorgehen, wenn der Servername ge=E4ndert weden soll
---------------------------------------------------------
# uname -S new_server


Change Media hostname (NBU Storage Unit)
** # bpstulist=20
DLT7000 2 name 0 -1 13 1 0 *NULL* 0 1 0 *NULL*
=09 =20
# xbpadm ->Storage Unit ->Change Storage Unit ->Host ->new_servername
=09 =20
Change Image database to reference new server
** # bpimagelist -L -backupid {old_servername}_imageid |grep Host
Host:      old_servername

# bpimage -newserver new_servername
=09 =20
** # bpimagelist -L -backupid {old_servername}_imageid |grep Host
Host:      new_servername

Hook up Robot and Inventory. This will re-enter Media held in Robot=
=20
into Robotic Volume Group.

Note: All backup image references to the client 'old_server' remain.=
=20
If structures from old_server need recovering to new_server then an=
=20
alternate client restore is required:-
   =20
# xbp ->File ->Config ->Client to browse for restores ->old_server
=09              ->Client to restore to -> new_server
=09=20
Steps marked with ** are just for confirmation purposes and are not=
=20
essential to the move server of procedure.

--Boundary_(ID_fnW/kA/+LJL4wiYnZkoavw)--