I'm trying to replace a cleaning tape at a remote location with a new one. My
offsite vendor puts tapes in and takes them out for us. When the cleaning
tapes were used up, I sent another but it doesn't work. The last one I sent, I
tested in my L180 and it worked fine. Does anyone have any ideas why it won't
work in the L80? The drives are Quantum220s in both libraries.
Messages from /var/adm/messages:
Sep 16 13:38:25 inveri02 tldcd[28489]: [ID 355708 daemon.notice] TLD(0) opening
robotic path /dev/sg/c2t0l0
Sep 16 13:38:25 inveri02 tldcd[28489]: [ID 792380 daemon.notice] inquiry()
function processing library STK L80 0214:
Sep 16 13:38:25 inveri02 tldcd[28489]: [ID 802088 daemon.notice] isSTK = TRUE
Sep 16 13:38:25 inveri02 tldcd[28489]: [ID 559680 daemon.notice] TLD(0)
closing/unlocking robotic path
Sep 16 13:38:25 inveri02 tldcd[25856]: [ID 792380 daemon.notice] inquiry()
function processing library STK L80 0214:
Sep 16 13:38:25 inveri02 tldcd[25856]: [ID 802088 daemon.notice] isSTK = TRUE
Sep 16 13:40:30 inveri02 ltid[25755]: [ID 993508 daemon.notice] LTID - Sent
ROBOTIC request, Type=11, Param2=0
Sep 16 13:40:30 inveri02 tldd[25816]: [ID 500273 daemon.notice] TLD(0) Cleaning
Tape CLN001 on drive 1, from slot 16
Sep 16 13:40:30 inveri02 tldcd[25856]: [ID 625502 daemon.notice] Processing
MOUNT, TLD(0) drive 1, slot 16, barcode CLN001 , vsn CLN001
Sep 16 13:40:30 inveri02 tldcd[28544]: [ID 355708 daemon.notice] TLD(0) opening
robotic path /dev/sg/c2t0l0
Sep 16 13:40:30 inveri02 tldcd[28544]: [ID 792380 daemon.notice] inquiry()
function processing library STK L80 0214:
Sep 16 13:40:30 inveri02 tldcd[28544]: [ID 802088 daemon.notice] isSTK = TRUE
Sep 16 13:40:31 inveri02 tldcd[28544]: [ID 106057 daemon.notice] TLD(0)
initiating MOVE_MEDIUM from addr 1015 to addr 500
Sep 16 13:40:31 inveri02 tldcd[28544]: [ID 147745 daemon.error] TLD(0) key =
0x5, asc = 0x30, ascq = 0x0, INCOMPATIBLE MEDIUM INSTALLED
Sep 16 13:40:31 inveri02 tldcd[28544]: [ID 841094 daemon.error] TLD(0)
Move_medium error: CHECK CONDITION
Sep 16 13:40:31 inveri02 tldcd[28544]: [ID 559680 daemon.notice] TLD(0)
closing/unlocking robotic path
Sep 16 13:40:31 inveri02 tldd[25816]: [ID 641593 daemon.notice] DecodeClean():
TLD(0) drive 1, Actual status: Robotic mount failure
Sep 16 13:40:31 inveri02 ltid[25755]: [ID 533417 daemon.notice] LTID - received
ROBOT MESSAGE, Type=55, LongParam=0, Param1=0, Param2=5
Sep 16 13:40:31 inveri02 ltid[25755]: [ID 307855 daemon.error] Cleaning for
drive 0 failed, status = Robotic mount failure
Sep 16 13:40:31 inveri02 ltid[25755]: [ID 206735 daemon.notice] CLEANQ is empty
Sep 16 13:40:31 inveri02 tldcd[25856]: [ID 792380 daemon.notice] inquiry()
function processing library STK L80 0214:
Sep 16 13:40:31 inveri02 tldcd[25856]: [ID 802088 daemon.notice] isSTK = TRUE
Cheryl King
System Administrator II
AIS - OpenView System and Servers Certified
Intrado Inc.
1601 Dry Creek Drive
Longmont, CO 80503
direct: 720.864.5162
mobile: 720.840.4786
page: 303-207-4648
fax: 720.494.6600
email: cheryl.king AT intrado DOT com
Intrado Inc.
www.intrado.com
ATTENTION:
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain confidential or privileged information. If you are not the intended
recipient, please notify Intrado Inc. immediately at 720.494.5800 and destroy
all copies of this message and any attachments.
|