Veritas-bu

[Veritas-bu] moving tapes

2004-08-10 07:23:55
Subject: [Veritas-bu] moving tapes
From: Robert.Stump AT dla DOT mil (Stump, Robert (Contractor) (DRMS))
Date: Tue, 10 Aug 2004 07:23:55 -0400
Sorry,
This was suppose to have been in response to your earlier question on
reusing catalog tapes.

The moving of tapes is determined by the type of library and controlling
software you are using. 

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Stump, 
Robert
(Contractor) (DRMS)
Sent: Tuesday, August 10, 2004 7:17 AM
To: 'SC'; netbackup-l; nbu-lserv; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] moving tapes

Vmquery -m <mediaID>
This will show the pool number
Then again run vmquery but as shown below Vmquery -deassignbyid <mediaID>
<pool_number> <status> Use the number 1 for <status>

Then run bplabel on the tape
# bplabel -help
Usage: bplabel -m media_ID -d density [-o] [-p volume_pool_name]
     [-n drive_name | -u device_number]
 

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of SC
Sent: Tuesday, August 10, 2004 7:03 AM
To: netbackup-l; nbu-lserv; veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] moving tapes

Hi,
i am running 3.4 on windows 2000 system
what command can i use to move tapes from slot1 of the tape library to
drive1 ??
thanks


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

<Prev in Thread] Current Thread [Next in Thread>