Hi,
 
I'm not completely sure which log we are looking at. As far as I can determine
the job failed to start up the arcmain process on the Teradata node. There are
a lot of possible reasons. 
 
First thing should be to check the dbclient log on both the admin client as
well as the Teradata node.
 
Regards,
 
Ysbrand
 
Ysbrand Bergman
Support Specialist
EMEA RTS
Teradata   
             a division of NCR


"Thomas Sprouse" <thomas.sprouse AT hughessupply DOT com> wrote:

> Has any one seen something like this before...
> 
> 17:13:40.454 [5607] <2> process_request: command C_REMOTE_EXECUTE (70)
> received
> 17:13:40.454 [5607] <2> process_request: remote execute request = 329199
> 70 hsibackup03 root 89 /usr/openv/netbackup/bin/tdbackex -launch -f
> _TMP_bk-backup03.20040630171455.3248.scr -np
> 17:13:40.454 [5607] <2> bpcd_remote_execute: from client
> hsibackup03.hsi.hughessupply.com: DestHost:hsibackup03 ReqUser:root
> Cmd:(89)/usr/openv/netbackup/bin/tdbackex -launch -f
> _TMP_bk-backup03.20040630171455.3248.scr -np
> 17:13:40.454 [5607] <2> read_host_info: CONNECT_NON_RES_PORT 0
> 17:13:40.454 [5607] <2> read_host_info: DYNAMIC_ADDRESS 0
> 17:13:40.454 [5607] <2> read_host_info: FREE_BROWSE 0
> 17:13:40.454 [5607] <2> read_host_info: LIST_RESTORE 0
> 17:13:40.454 [5607] <2> read_host_info: MAX_JOBS_THIS_CLIENT 0
> 17:13:40.454 [5607] <2> read_host_info: NO_CALLBACK 0
> 17:13:40.454 [5607] <2> read_host_info: WOFB_ENABLED 0
> 17:13:40.454 [5607] <2> read_host_info: WOFB_FIM 0
> 17:13:40.454 [5607] <2> read_host_info: WOFB_USAGE 0
> 17:13:40.454 [5607] <2> read_host_info: WOFB_ERROR 0
> 17:13:40.455 [5607] <2> bpcr_ex_client_cmd: getservbyname returned port
> 13782
> 17:13:40.455 [5607] <2> nb_getsockconnected: host=hsibackup03
> service=bpcd address=10.88.22.195 protocol=tcp reserved port=13782
> 17:13:40.455 [5607] <2> nb_getsockconnected: Connect to hsibackup03 on
> port 890
> 17:13:40.455 [5607] <2> logconnections: BPCD CONNECT FROM
> 10.88.21.68.890 TO 10.88.22.195.13782
> 17:13:40.574 [5607] <2> bpcr_ex_client_cmd: CLIENT_CMD_SOCK from bpcr =
> 5
> 17:13:40.574 [5607] <2> bpcr_ex_client_cmd: CLIENT_STAT_SOCK from bpcr =
> 8
> 17:13:40.650 [5607] <2> bpcr_disconnect_rqst: bpcr failed reading
> disconnect message from client
> 17:13:40.651 [5607] <2> bpcr_ex_client_cmd: couldn't disconnect from
> bpcd on hsibackup03
> 17:13:40.651 [5607] <2> bpcd_remote_execute: INF - bpcd_remote_execute
> status = 26
> 17:13:40.651 [5607] <2> process_request: bpcd_remote_execute failed -
> status = client/server handshaking failed (26)
> 17:13:40.818 [5399] <2> childterm: pid=5607 exit=26, signo=0 core=no
> 17:13:40.818 [5399] <2> schild: wait2() ECHILD
> 17:13:40.818 [5399] <2> listen_loop: select() interrupted
> 
> 
>