When setting up the libraries, each will have a different Storage Unit 
(STU).  You can set the "first tape library" STU to be "On Demand Only".  
Then in each policy you want to direct to that STU, specify it.

Then the rest of your policies can be left at "ANY AVAILABLE" STU and will 
default to the "other tape library" (as long as it's STU ISN'T also set to 
"on demand only").

-Tim


On Wed, 14 Apr 2004, Chirag Parekh wrote:

> Hi,
> 
> Can anyone tell me how can I connect 2 different tape libraries, one
> with DLT drives and another with LTO drives, to a single NB Master
> server and have certain backup's directed to the first tape library and
> the rest to the other tape library?
> 
> Thanks,
> 
> > Chirag Parekh
> > Junior UNIX Systems Administrator
> > 
> > Belkin Corporation
> > Information Services
> > chiragp AT belkin DOT com
> > www.belkin.com
> > 
> 
> Confidential
> This e-mail and any files transmitted with it are the property
> of Belkin Corporation and/or its affiliates, are confidential,
> and are intended solely for the use of the individual or
> entity to whom this e-mail is addressed.  If you are not one
> of the named recipients or otherwise have reason to believe
> that you have received this e-mail in error, please notify the
> sender and delete this message immediately from your computer.
> Any other use, retention, dissemination, forwarding, printing
> or copying of this e-mail is strictly prohibited.
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>