[Veritas-bu] RE: ADIC Scalar 10k
2004-03-23 12:43:55
You can definitely use the Scalar 10K with NBU without using Scalar DLC. The
library control is SCSI, so the robot should be connected to one of the SNCs
that your tape drives are connected to (unless you've got direct-fibre LTO-2s).
If the drives are direct-fibre, there should be an SNC to allow the robotic
control to attach to the SAN. So, yes there does have to be something between
the library and the SAN. ADIC Professional Services will install the SAN
connectivity for the library.
Don't forget to create the ovpass driver to allow AIX to talk to the library.
Russell
-----Original Message-----
From: "Jennifer Green" <jc AT goo-rooz DOT com>
To: veritas-bu AT mailman.eng.auburn DOT edu
Date: Tue, 23 Mar 2004 12:17:27 -0400
Subject: [Veritas-bu] ADIC Scalar 10k
Hello,
Does anyone use this library with NBU without an SDLC in a Fiber
environment? I am being told that somewhere in the library - either the
drives or the robot needs arbitrated loop so there needs to be some sort of
adaptor or bridge in between it and the Fiber switch. This is in an AIX
environment if that makes a difference?
Thanks
Jennifer
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] RE: ADIC Scalar 10k,
Brown, Russell X -ND <=
|
|
|