This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C3A769.A86CFB28
Content-Type: text/plain;
charset="windows-1252"
Hi folk,
NetBackup 3.4.2 with ATL P7000 16 x SDLT220 LVD drives
Always receiving error below in my /var/adm/messages in Solaris 8
Nov 8 03:18:44 sgs15i-001 unix: WARNING: /sbus@e,0/fce@1,400000/st@1,0
(st288):
Nov 8 03:18:44 sgs15i-001 Error for Command: read
Error Level: Fatal
Nov 8 03:18:44 sgs15i-001 unix: Requested Block: 0 Error Block: 0
Nov 8 03:18:44 sgs15i-001 unix: Vendor: QUANTUM Serial Number: . G
Nov 8 03:18:44 sgs15i-001 unix: Sense Key: Media Error
Nov 8 03:18:44 sgs15i-001 unix: ASC: 0x11 (unrecovered read error),
ASCQ: 0x0, FRU: 0x0
Nov 8 03:20:34 sgs15i-001 LOGMON: sgs15i-001 critical Infr
/var/adm/messages Cmmnderr_0_Infr
Nov 8 03:18:44 sgs15i-001 Error for Command: read Error Level: Fatal
Nov 8 03:20:34 sgs15i-001 LOGMON: sgs15i-001 warning Infr /var/adm/messages
sense_0_Infr
Nov 8 03:18:44 sgs15i-001 unix: Sense Key: Media Error
Nov 8 07:40:10 sgs15i-001 rsh[15922]: can't get stderr port: Cannot assign
requested address
Nov 8 07:45:09 sgs15i-001 rsh[18955]: can't get stderr port: Cannot assign
requested address
Nov 8 08:02:47 sgs15i-001 rsh[1229]: can't get stderr port: Cannot assign
requested address
Nov 8 08:05:09 sgs15i-001 rsh[3525]: can't get stderr port: Cannot assign
requested address
Nov 8 09:08:03 sgs15i-001 tldd[22990]: TLD(2) [22990] unable to connect to
tldcd on sgs15i-001: Cannot assign requested address (126)
Nov 8 09:08:03 sgs15i-001 tldd[4348]: TLD(2) going to DOWN state, status:
Control daemon connect or protocol error
Nov 8 09:10:08 sgs15i-001 tldd[4348]: TLD(2) going to UP state
Nov 8 09:15:09 sgs15i-001 rsh[774]: can't get stderr port: Cannot assign
requested address
Nov 8 09:20:09 sgs15i-001 rsh[4322]: can't get stderr port: Cannot assign
requested address
Nov 8 09:39:00 sgs15i-001 tldd[16278]: TLD(2) [16278] unable to connect to
tldcd on sgs15i-001: Cannot assign requested address (126)
Nov 8 09:39:00 sgs15i-001 tldd[4348]: TLD(2) going to DOWN state, status:
Control daemon connect or protocol error
Nov 8 09:39:32 sgs15i-001 tldd[16281]: TLD(2) [16281] unable to connect to
tldcd on sgs15i-001: Cannot assign requested address (126)
Nov 8 09:39:32 sgs15i-001 tldd[4348]: Cannot find request in
DecodeResponse, pid = 16281
Nov 8 09:39:47 sgs15i-001 tldd[4348]: Cannot find request in
DecodeResponse, pid = 16289
Nov 8 09:41:50 sgs15i-001 tldd[4348]: TLD(2) going to UP state
Nov 8 10:40:08 sgs15i-001 rsh[10297]: can't get stderr port: Cannot assign
requested address
Nov 8 10:59:02 sgs15i-001 tldd[22508]: TLD(2) [22508] unable to connect to
tldcd on sgs15i-001: Cannot assign requested address (126)
Nov 8 10:59:02 sgs15i-001 tldd[4348]: TLD(2) going to DOWN state, status:
Control daemon connect or protocol error
Nov 8 11:01:07 sgs15i-001 tldd[4348]: TLD(2) going to UP state
Nov 8 13:45:09 sgs15i-001 rsh[14908]: can't get stderr port: Cannot assign
requested address
Nov 8 13:50:09 sgs15i-001 rsh[18116]: can't get stderr port: Cannot assign
requested address
Nov 8 14:40:08 sgs15i-001 rsh[24975]: can't get stderr port: Cannot assign
requested address
Nov 8 16:54:42 sgs15i-001 tldd[4559]: TLD(2) [4559] unable to connect to
tldcd on sgs15i-001: Cannot assign requested address (126)
Nov 8 16:54:42 sgs15i-001 tldd[4348]: TLD(2) going to DOWN state, status:
Control daemon connect or protocol error
Nov 8 16:55:53 sgs15i-001 tldd[4348]: Cannot find request in
DecodeResponse, pid = 4558
Nov 8 16:57:56 sgs15i-001 tldd[4348]: TLD(2) going to UP state
Nov 8 17:50:09 sgs15i-001 rsh[16128]: can't get stderr port: Cannot assign
requested address
Nov 8 17:54:43 sgs15i-001 tldd[19188]: TLD(2) [19188] unable to connect to
tldcd on sgs15i-001: Cannot assign requested address (126)
Nov 8 17:54:43 sgs15i-001 tldd[4348]: TLD(2) going to DOWN state, status:
Control daemon connect or protocol error
Nov 8 17:56:48 sgs15i-001 tldd[4348]: TLD(2) going to UP state
Nov 8 18:17:51 sgs15i-001 rsh[13111]: can't get stderr port: Cannot assign
requested address
Nov 8 18:18:00 sgs15i-001 rsh[13161]: can't get stderr port: Cannot assign
requested address
Nov 8 19:00:08 sgs15i-001 rsh[19357]: can't get stderr port: Cannot assign
requested address
Nov 8 19:08:22 sgs15i-001 tldd[25752]: TLD(2) [25752] unable to connect to
tldcd on sgs15i-001: Cannot assign requested address (126)
Nov 8 19:08:22 sgs15i-001 tldd[4348]: TLD(2) going to DOWN state, status:
Control daemon connect or protocol error
Nov 8 19:09:04 sgs15i-001 tldd[4348]: Cannot find request in
DecodeResponse, pid = 25247
Nov 8 19:09:18 sgs15i-001 tldd[4348]: Cannot find request in
DecodeResponse, pid = 25502
Nov 8 19:11:05 sgs15i-001 csrdistd[27694]: sgs15i-001.sg_bkoff.csfb.com.sg:
Startup for Host: sgs00i-152.sg_trade.csfb.com.sg User: root
Nov 8 19:11:16 sgs15i-001 csrdistd[27858]: sgs15i-001.sg_bkoff.csfb.com.sg:
Startup for Host: sgs00i-152.sg_trade.csfb.com.sg User: root
Nov 8 19:11:21 sgs15i-001 tldd[4348]: TLD(2) going to UP state
What is that means, what is tldd, tldcd ?
Thanks
Robert
------_=_NextPart_001_01C3A769.A86CFB28
Content-Type: text/html;
charset="windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dwindows-1252">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>Cannot assign requested address ?</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2>Hi folk,</FONT>
<BR><FONT SIZE=3D2>NetBackup 3.4.2 with ATL P7000 16 x SDLT220 LVD =
drives</FONT>
<BR><FONT SIZE=3D2>Always receiving error below in my /var/adm/messages =
in Solaris 8</FONT>
</P>
<P><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 unix: WARNING: =
/sbus@e,0/fce@1,400000/st@1,0 (st288):</FONT>
<BR><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 =
Error for Command: =
read &n=
bsp; Error Level: =
Fatal</FONT>
<BR><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 unix: =
Requested Block: 0 Error Block: =
0</FONT>
<BR><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 unix: =
Vendor: QUANTUM Serial =
Number: . G </FONT>
<BR><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 unix: =
Sense Key: Media Error</FONT>
<BR><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 unix: =
ASC: 0x11 (unrecovered read =
error), ASCQ: 0x0, FRU: 0x0</FONT>
<BR><FONT SIZE=3D2>Nov 8 03:20:34 sgs15i-001 LOGMON: sgs15i-001 =
critical Infr /var/adm/messages Cmmnderr_0_Infr </FONT>
<BR><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 Error for Command: read =
Error Level: Fatal</FONT>
<BR><FONT SIZE=3D2>Nov 8 03:20:34 sgs15i-001 LOGMON: sgs15i-001 =
warning Infr /var/adm/messages sense_0_Infr </FONT>
<BR><FONT SIZE=3D2>Nov 8 03:18:44 sgs15i-001 unix: Sense Key: Media =
Error</FONT>
<BR><FONT SIZE=3D2>Nov 8 07:40:10 sgs15i-001 rsh[15922]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 07:45:09 sgs15i-001 rsh[18955]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 08:02:47 sgs15i-001 rsh[1229]: can't get =
stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 08:05:09 sgs15i-001 rsh[3525]: can't get =
stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:08:03 sgs15i-001 tldd[22990]: TLD(2) =
[22990] unable to connect to tldcd on sgs15i-001: Cannot assign =
requested address (126)</FONT></P>
<P><FONT SIZE=3D2>Nov 8 09:08:03 sgs15i-001 tldd[4348]: TLD(2) =
going to DOWN state, status: Control daemon connect or protocol =
error</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:10:08 sgs15i-001 tldd[4348]: TLD(2) =
going to UP state</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:15:09 sgs15i-001 rsh[774]: can't get =
stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:20:09 sgs15i-001 rsh[4322]: can't get =
stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:39:00 sgs15i-001 tldd[16278]: TLD(2) =
[16278] unable to connect to tldcd on sgs15i-001: Cannot assign =
requested address (126)</FONT></P>
<P><FONT SIZE=3D2>Nov 8 09:39:00 sgs15i-001 tldd[4348]: TLD(2) =
going to DOWN state, status: Control daemon connect or protocol =
error</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:39:32 sgs15i-001 tldd[16281]: TLD(2) =
[16281] unable to connect to tldcd on sgs15i-001: Cannot assign =
requested address (126)</FONT></P>
<P><FONT SIZE=3D2>Nov 8 09:39:32 sgs15i-001 tldd[4348]: Cannot =
find request in DecodeResponse, pid =3D 16281</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:39:47 sgs15i-001 tldd[4348]: Cannot =
find request in DecodeResponse, pid =3D 16289</FONT>
<BR><FONT SIZE=3D2>Nov 8 09:41:50 sgs15i-001 tldd[4348]: TLD(2) =
going to UP state</FONT>
<BR><FONT SIZE=3D2>Nov 8 10:40:08 sgs15i-001 rsh[10297]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 10:59:02 sgs15i-001 tldd[22508]: TLD(2) =
[22508] unable to connect to tldcd on sgs15i-001: Cannot assign =
requested address (126)</FONT></P>
<P><FONT SIZE=3D2>Nov 8 10:59:02 sgs15i-001 tldd[4348]: TLD(2) =
going to DOWN state, status: Control daemon connect or protocol =
error</FONT>
<BR><FONT SIZE=3D2>Nov 8 11:01:07 sgs15i-001 tldd[4348]: TLD(2) =
going to UP state</FONT>
<BR><FONT SIZE=3D2>Nov 8 13:45:09 sgs15i-001 rsh[14908]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 13:50:09 sgs15i-001 rsh[18116]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 14:40:08 sgs15i-001 rsh[24975]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 16:54:42 sgs15i-001 tldd[4559]: TLD(2) =
[4559] unable to connect to tldcd on sgs15i-001: Cannot assign =
requested address (126)</FONT></P>
<P><FONT SIZE=3D2>Nov 8 16:54:42 sgs15i-001 tldd[4348]: TLD(2) =
going to DOWN state, status: Control daemon connect or protocol =
error</FONT>
<BR><FONT SIZE=3D2>Nov 8 16:55:53 sgs15i-001 tldd[4348]: Cannot =
find request in DecodeResponse, pid =3D 4558</FONT>
<BR><FONT SIZE=3D2>Nov 8 16:57:56 sgs15i-001 tldd[4348]: TLD(2) =
going to UP state</FONT>
<BR><FONT SIZE=3D2>Nov 8 17:50:09 sgs15i-001 rsh[16128]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 17:54:43 sgs15i-001 tldd[19188]: TLD(2) =
[19188] unable to connect to tldcd on sgs15i-001: Cannot assign =
requested address (126)</FONT></P>
<P><FONT SIZE=3D2>Nov 8 17:54:43 sgs15i-001 tldd[4348]: TLD(2) =
going to DOWN state, status: Control daemon connect or protocol =
error</FONT>
<BR><FONT SIZE=3D2>Nov 8 17:56:48 sgs15i-001 tldd[4348]: TLD(2) =
going to UP state</FONT>
<BR><FONT SIZE=3D2>Nov 8 18:17:51 sgs15i-001 rsh[13111]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 18:18:00 sgs15i-001 rsh[13161]: can't =
get stderr port: Cannot assign requested address</FONT>
<BR><FONT SIZE=3D2>Nov 8 19:00:08 sgs15i-001 rsh[19357]: can't =
get stderr port: Cannot assign requested address</FONT>
</P>
<P><FONT SIZE=3D2>Nov 8 19:08:22 sgs15i-001 tldd[25752]: TLD(2) =
[25752] unable to connect to tldcd on sgs15i-001: Cannot assign =
requested address (126)</FONT></P>
<P><FONT SIZE=3D2>Nov 8 19:08:22 sgs15i-001 tldd[4348]: TLD(2) =
going to DOWN state, status: Control daemon connect or protocol =
error</FONT>
<BR><FONT SIZE=3D2>Nov 8 19:09:04 sgs15i-001 tldd[4348]: Cannot =
find request in DecodeResponse, pid =3D 25247</FONT>
<BR><FONT SIZE=3D2>Nov 8 19:09:18 sgs15i-001 tldd[4348]: Cannot =
find request in DecodeResponse, pid =3D 25502</FONT>
<BR><FONT SIZE=3D2>Nov 8 19:11:05 sgs15i-001 csrdistd[27694]: =
sgs15i-001.sg_bkoff.csfb.com.sg: Startup for Host: =
sgs00i-152.sg_trade.csfb.com.sg User: root</FONT></P>
<P><FONT SIZE=3D2>Nov 8 19:11:16 sgs15i-001 csrdistd[27858]: =
sgs15i-001.sg_bkoff.csfb.com.sg: Startup for Host: =
sgs00i-152.sg_trade.csfb.com.sg User: root</FONT></P>
<P><FONT SIZE=3D2>Nov 8 19:11:21 sgs15i-001 tldd[4348]: TLD(2) =
going to UP state</FONT>
</P>
<P><FONT SIZE=3D2>What is that means, what is tldd, tldcd ?</FONT>
<BR><FONT SIZE=3D2>Thanks</FONT>
<BR><FONT SIZE=3D2>Robert</FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C3A769.A86CFB28--
|
