Veritas-bu

[Veritas-bu] LTO II perf settings

2003-11-05 17:31:22
Subject: [Veritas-bu] LTO II perf settings
From: david.chapa AT adic DOT com (David Chapa)
Date: Wed, 5 Nov 2003 15:31:22 -0700
Veritas would tell you to refer to the Manufacturer's specifications,
which is why I ask.

However, the typical answer is LTO2 supports large block sizes.  The IBM
LTO2 drives do support large block sizes.  Per the IBM Redbook, tuning
an LTO2 drive in a VERITAS NBU environment they suggest 256KB block
sizes (262144 bytes) with 32 DATA buffers.  Of course all of this really
depends on your host server, how much memory, what the OS is, if it is
adequately configured to support this much shared memory, etc.  "Your
mileage may vary" as it were.


David A. Chapa * Technical Advisor, Technical Marketing * ADIC *
720.249.5836 * david.chapa AT adic DOT com

Pathlight VX - Integrated Disk-to-Tape Backup - http://www.adic.com


-----Original Message-----
From: Shuster, James [mailto:jshuster AT etrade DOT com] 
Sent: Wednesday, November 05, 2003 1:19 PM
To: David Chapa; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] LTO II perf settings

Not sure of a brand,

I just need what Veritas would recommend for LTO II for the
/usr/openv/netbackup/db/config/SIZE_DATA_BUFFER_

for  DLT7000 they say 65336.
i need this for some sizing etc...


-----Original Message-----
From: David Chapa [mailto:david.chapa AT adic DOT com]
Sent: Wednesday, November 05, 2003 3:02 PM
To: Shuster, James; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] LTO II perf settings


Who's BRAND?

IBM published a REDBOOK documenting their LTO gen 2 product, if that's
what you are interested in.

David

David A. Chapa * Technical Advisor, Technical Marketing * ADIC *
720.249.5836 * david.chapa AT adic DOT com

Pathlight VX - Integrated Disk-to-Tape Backup - http://www.adic.com


-----Original Message-----
From: Shuster, James [mailto:jshuster AT etrade DOT com] 
Sent: Wednesday, November 05, 2003 12:30 PM
To: 'veritas-bu AT mailman.eng.auburn DOT edu '
Subject: [Veritas-bu] LTO II perf settings

Does anybody know the "best practices" buffer size setting for LTO II?
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


<Prev in Thread] Current Thread [Next in Thread>