Keath-

I must point out that what you're asking for is
possible regardless of who makes your library.

Dave has truly gone to the dark side of vendor employment!
;-)))

(and I'm one to talk)
HTH
rob

On Wed, Oct 29, 2003 at 09:06:09AM -0700 or thereabouts, David Chapa wrote:
> You can with an ADIC i2000 library.. ;-)
>  
> I know shameless plug...forgive me...
>  
> Well, what you can do is create two storage units, both with a maximum
> concurrent drive value of 2.
>  
> You won't necessarily be able to "specify" which 2 drives are associated
> with which logical storage units...but you will achieve your ultimate
> goal.
>  
> HTH
> David
>  
> David A. Chapa * Technical Advisor, Technical Marketing * ADIC *
> 720.249.5836 * david.chapa AT adic DOT com
> Pathlight VX - Integrated Disk-to-Tape Backup - http://www.adic.com
> <http://www.adic.com> 
> -----Original Message-----
> From: Marx, Keath [mailto:Keath.Marx AT anthem DOT com] 
> Sent: Wednesday, October 29, 2003 8:54 AM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] Split the Robot?
>  
> Is there a way to logically split a robot?  Here is the scenario:
> I have a 4 Drive STK L40.
> I want 2 of the drives reserved for backup/restore and I want 2 that can
> be used for Duplication.  How can I split these up?
> Keath Marx
> SELC
> Anthem Southeast
> 804 354-3282
> keath.marx AT anthem DOT com
> This message, including files attached to it, may contain confidential
> information that is intended only for the use of the ADDRESSEE(S) named
> above. If you are not an intended recipient, you are hereby notified
> that any dissemination or copying of the information contained in this
> message, or the taking of any action in reliance upon the information,
> is strictly prohibited. If you have received this message in error,
> please notify the sender immediately and delete the message from your
> system. Thank you. 
> 
> CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
> is for the sole use of the intended recipient(s) and may contain
> confidential and privileged information or otherwise be protected by
> law. Any unauthorized review, use, disclosure or distribution is
> prohibited. If you are not the intended recipient, please contact the
> sender by reply e-mail and destroy all copies of the original message.