Thanks, I just tried this and still am not seeing the drive with "sgscan".
This thing is really frustrating me.

Pete Akre

-----Original Message-----
From: Teklu, Daniel [mailto:daniel.teklu AT thomson DOT com]
Sent: Wednesday, October 01, 2003 1:01 PM
To: Pete Akre; 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: RE: [Veritas-bu] Netbackup Not Seeing My Tape Drive


You will have to re-install the sg devices and drivers:

- rm /dev/rmt/*
- rm /dev/sg/*
- rm /kernel/drv/sg
- rm /kernel/drv/sg.conf
- rem_drv sg
- drvconfig; tapes
- /usr/openv/volmgr/bin/driver/sg.install

The same thing happened to me installing a new L9 on a Solaris 8 box, and
the above steps fixed it.

-Daniel



-----Original Message-----
From: Pete Akre [mailto:PAkre AT jni DOT com] 
Sent: Wednesday, October 01, 2003 3:38 PM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: [Veritas-bu] Netbackup Not Seeing My Tape Drive


I am running NetBackup 4.5 on a Solaris 8 box, but it will not see the IBM
Ultrium2 tape drive in the STK L700 (this is the only one I am connected
to). The Solaris box sees it and has the correct entries in "/dev/rmt". But
when I do an "sgscan" or try to have NetBackup discover the drive from the
gui it will not see it.

Sorry if this is an ignorant question, but i'm under a time crunch and am
new to some of these concepts.

Thanks

Pete Akre
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu