This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C37E16.008CBEB0
Content-Type: text/plain
I've seen a lot 13's with HP/Compaq nics using HP/Compaq drivers with
HP/Compaq adapter teaming - both windows and linux (adapter bonding). If
you run this configuration on your master or media servers, try Intel
drivers (most of their nics are just rebranded Intel's) and either break the
team or use the Intel teaming. Clients seem to work fine either way.
Also have your network team check for FCS errors on the switches.
That's what did the trick for me.
Andrew
_____
From: Register, Joe [mailto:jregister AT citistreetonline DOT com]
Sent: Thursday, September 18, 2003 2:13 PM
To: 'ida3248b AT post.cybercity DOT dk'; williams.k.1 AT pg DOT com;
veritas-bu AT mailman.eng.auburn DOT edu
I just fixed my 13 error.
The nic was at 100 full the switch was at 100 full. The driver was at latest
HP levels.
I simply did this. Moved the lan cable to the second nic, set up that nic
exactly like the other one and it fixed my problem. Even though the unused
nic was disabled when I was using the other one, microsoft must see them?
Try changing nics. Worked for me.
-----Original Message-----
From: ida3248b AT post.cybercity DOT dk [mailto:ida3248b AT post.cybercity DOT
dk
<mailto:ida3248b AT post.cybercity DOT dk> ]
Sent: Thursday, September 18, 2003 1:44 PM
To: williams.k.1 AT pg DOT com; veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] Status Code 13
Hello Kris
Check the netcard setting/configuration the client and the net switch is
connected to, a lot of our status codes 13, have been caused by different
setting and/or auto-negation.
The rule of thumb in our backup group is that auto-negation is bad.
Are you backup running through a fire-wall, if it is it could be time-out in
the fire-wall that's creating this error.
Regards
Michael
On Thu, 18 Sep 2003 11:06:20 -0400, williams.k.1 wrote
> I have a windows 2000 Client backing up to a NT 4 master server. As
> soon as the job starts, it fails with a code 13.
>
> Here is the bperror output:
>
> 09/18/2003 10:55:25 BDC-NBM013 bdc-uss009 added backup job for
> client bdc-uss009, class nb014-nt-gen, schedule
> d_2w_i_retry part 0 to NetBackup scheduler work queue
>
> 09/18/2003 10:55:26 BDC-NBM013 bdc-uss009 started backup job for client
> bdc-uss009, class nb014-nt-gen, schedule
> d_2w_i_retry on storage unit bdc-nb014_dlt
> 09/18/2003 10:55:27 BDC-NBM013 bdc-uss009 client bdc-uss009
> handling path ALL_LOCAL_DRIVES
> 09/18/2003 10:55:27 BDC-NBM013 bdc-uss009 client bdc-uss009
> handling path /HKEY_USERS
> 09/18/2003 10:55:27 BDC-NBM013 bdc-uss009 client bdc-uss009
> handling path /HKEY_CURRENT_USER
> 09/18/2003 10:55:27 BDC-NBM013 bdc-uss009 client bdc-uss009
> handling path /HKEY_LOCAL_MACHINE
> 09/18/2003 10:55:27 BDC-NBM013 bdc-uss009 client bdc-uss009
> handling path /HKEY_CLASSES_ROOT
> 09/18/2003 10:55:37 bdc-nb014 bdc-uss009 socket read failed,
> Connection reset by peer. (10054)
> 09/18/2003 10:55:38 bdc-nb014 bdc-uss009 unable to perform read
> from client socket, connection may have been broken
> 09/18/2003 10:55:38 bdc-nb014 bdc-uss009 could not send server
> status message
> 09/18/2003 10:55:39 bdc-nb014 bdc-uss009 CLIENT bdc-uss009 CLASS
> nb014-nt-gen SCHED d_2w_i_retry EXIT STATUS 13
> (file read failed)
> 09/18/2003 10:55:39 bdc-nb014 bdc-uss009 backup of client bdc-
> uss009 exited with status 13 (file read failed)
>
> Everything is NBU 3.4. Anyone have any ideas?
>
> Thanks,
>
> Kris
--
Cybercity Webhosting (http://www.cybercity.dk <http://www.cybercity.dk> )
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
<http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu>
------_=_NextPart_001_01C37E16.008CBEB0
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:st1=3D"urn:schemas-microsoft-com:office:smarttags" =
xmlns=3D"http://www.w3.org/TR/REC-html40";>
<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]-->
<title>RE: [Veritas-bu] Status Code 13</title>
<o:SmartTagType =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
name=3D"time"/>
<o:SmartTagType =
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
name=3D"date"/>
<!--[if !mso]>
<style>
st1\:*{behavior:url(#default#ieooui) }
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:blue;
text-decoration:underline;}
p
{mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman";}
span.EmailStyle19
{mso-style-type:personal-reply;
font-family:Arial;
color:navy;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;
mso-footer-margin:.5in;}
div.Section1
{page:Section1;}
-->
</style>
</head>
<body lang=3DEN-US link=3Dblue vlink=3Dblue>
<div class=3DSection1>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>I've seen a lot 13's with
HP/Compaq nics using HP/Compaq drivers with HP/Compaq adapter teaming -
both windows and linux (adapter bonding). If you run this =
configuration on
your master or media servers, try Intel drivers (most of their nics are =
just
rebranded Intel's) and either break the team or use the Intel =
teaming. Clients
seem to work fine either way. <o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>=
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Also have your network team check =
for FCS
errors on the switches.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>=
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>That's what did the trick for =
me.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>=
<div>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Andrew</span></font><o:p></o:p></p>=
</div>
<div>
<div class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><font =
size=3D3
face=3D"Times New Roman"><span style=3D'font-size:12.0pt'>
<hr size=3D2 width=3D"100%" align=3Dcenter tabindex=3D-1>
</span></font></div>
<p class=3DMsoNormal><b><font size=3D2 face=3DTahoma><span =
style=3D'font-size:10.0pt;
font-family:Tahoma;font-weight:bold'>From:</span></font></b><font =
size=3D2
face=3DTahoma><span style=3D'font-size:10.0pt;font-family:Tahoma'> =
Register, Joe
[mailto:jregister AT citistreetonline DOT com] <br>
<b><span style=3D'font-weight:bold'>Sent:</span></b> <st1:date =
Year=3D"18" Day=3D"18"
Month=3D"9" ls=3D"trans" w:st=3D"on">Thursday, <st1:date Year=3D"18" =
Day=3D"18" Month=3D"9"
ls=3D"trans" w:st=3D"on">September 18, =
2003</st1:date></st1:date><st1:time
Minute=3D"13" Hour=3D"14" w:st=3D"on"> 2:13 PM</st1:time><br>
<b><span style=3D'font-weight:bold'>To:</span></b> =
'ida3248b AT post.cybercity DOT dk';
williams.k.1 AT pg DOT com; =
veritas-bu AT mailman.eng.auburn DOT edu</span></font><o:p></o:p></p>
</div>
<p class=3DMsoNormal><font size=3D3 face=3D"Times New Roman"><span =
style=3D'font-size:
12.0pt'><o:p> </o:p></span></font></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>I just
fixed my 13 error.</span></font> <o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>The nic
was at 100 full the switch was at 100 full. The driver was at latest HP =
levels.</span></font>
<o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>I simply
did this. Moved the lan cable to the second nic, set up that nic =
exactly like
the other one and it fixed my problem. Even though the unused nic was =
disabled
when I was using the other one, microsoft must see them? =
</span></font><o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>Try
changing nics. Worked for me.</span></font> <o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>-----Original
Message-----</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>From: =
ida3248b AT post.cybercity DOT dk [<a
href=3D"mailto:ida3248b AT post.cybercity DOT dk">mailto:[email protected]=
y.dk</a>]
</span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>Sent: <st1:date =
Year=3D"18" Day=3D"18"
Month=3D"9" ls=3D"trans" w:st=3D"on">Thursday, <st1:date Year=3D"18" =
Day=3D"18" Month=3D"9"
ls=3D"trans" w:st=3D"on">September 18, =
2003</st1:date></st1:date><st1:time
Minute=3D"44" Hour=3D"13" w:st=3D"on"> 1:44 PM</st1:time></span></font> =
<br>
<font size=3D2><span style=3D'font-size:10.0pt'>To: =
williams.k.1 AT pg DOT com;
veritas-bu AT mailman.eng.auburn DOT edu</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>Subject: Re: =
[Veritas-bu] Status
Code 13</span></font> <o:p></o:p></p>
<p class=3DMsoNormal><font size=3D3 face=3D"Times New Roman"><span =
style=3D'font-size:
12.0pt'><o:p> </o:p></span></font></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>Hello
Kris</span></font> <o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>Check the
netcard setting/configuration the client and the net switch is =
</span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>connected to, a lot of =
our status
codes 13, have been caused by different </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>setting and/or =
auto-negation. </span></font><o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>The rule
of thumb in our backup group is that auto-negation is =
bad.</span></font> <o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>Are you
backup running through a fire-wall, if it is it could be time-out in =
</span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>the fire-wall that's =
creating this
error.</span></font> <o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>Regards</span></font>
<br>
<font size=3D2><span style=3D'font-size:10.0pt'>Michael</span></font> =
<o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>On Thu,
18 Sep 2003 11:06:20 -0400, williams.k.1 wrote</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> I have a windows =
2000 Client
backing up to a NT 4 master server. As</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> soon as the job =
starts, it
fails with a code 13.</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> Here is the =
bperror output:</span></font>
<br>
<font size=3D2><span style=3D'font-size:10.0pt'>> </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:25 =
BDC-NBM013
bdc-uss009 added backup job for </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>>
client =
bdc-uss009, class nb014-nt-gen, schedule </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> d_2w_i_retry
part &n=
bsp;
0 to NetBackup scheduler work queue</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:26 =
BDC-NBM013
bdc-uss009 started backup job for client</span></font> <br>
<font size=3D2><span =
style=3D'font-size:10.0pt'>>  =
;  =
;
bdc-uss009, class nb014-nt-gen, schedule </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> d_2w_i_retry
on &nbs=
p;
storage unit bdc-nb014_dlt</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:27 =
BDC-NBM013
bdc-uss009 client bdc-uss009 </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> handling
path &n=
bsp;
ALL_LOCAL_DRIVES</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:27 =
BDC-NBM013
bdc-uss009 client bdc-uss009 </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> handling
path &n=
bsp;
/HKEY_USERS</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:27 =
BDC-NBM013
bdc-uss009 client bdc-uss009 </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> handling
path &n=
bsp;
/HKEY_CURRENT_USER</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:27 =
BDC-NBM013
bdc-uss009 client bdc-uss009 </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> handling
path &n=
bsp;
/HKEY_LOCAL_MACHINE</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:27 =
BDC-NBM013
bdc-uss009 client bdc-uss009 </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> handling
path &n=
bsp;
/HKEY_CLASSES_ROOT</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:37 =
bdc-nb014
bdc-uss009 socket read failed,</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> Connection
reset &=
nbsp;
by peer. (10054)</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:38 =
bdc-nb014
bdc-uss009 unable to perform read </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> from
client =
socket, connection may have been broken</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:38 =
bdc-nb014
bdc-uss009 could not send server</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> status =
message</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:39 =
bdc-nb014
bdc-uss009 CLIENT bdc-uss009 CLASS </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>>
nb014-nt-gen =
SCHED d_2w_i_retry EXIT STATUS 13 </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> (file read =
failed)</span></font>
<br>
<font size=3D2><span style=3D'font-size:10.0pt'>> <st1:date =
Year=3D"2003" Day=3D"18"
Month=3D"09" ls=3D"trans" w:st=3D"on">09/18/2003</st1:date> 10:55:39 =
bdc-nb014
bdc-uss009 backup of client bdc-</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> uss009
exited =
with status 13 (file read failed)</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> Everything is NBU =
3.4. Anyone
have any ideas?</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> =
Thanks,</span></font> <br>
<font size=3D2><span style=3D'font-size:10.0pt'>> </span></font><br>
<font size=3D2><span style=3D'font-size:10.0pt'>> Kris</span></font> =
<o:p></o:p></p>
<p class=3DMsoNormal><font size=3D3 face=3D"Times New Roman"><span =
style=3D'font-size:
12.0pt'><o:p> </o:p></span></font></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>--</span></font>
<br>
<font size=3D2><span style=3D'font-size:10.0pt'>Cybercity Webhosting =
(<a
href=3D"http://www.cybercity.dk"; =
target=3D"_blank">http://www.cybercity.dk</a>)</span></font>
<o:p></o:p></p>
<p><font size=3D2 face=3D"Times New Roman"><span =
style=3D'font-size:10.0pt'>_____________________________________________=
__</span></font>
<br>
<font size=3D2><span style=3D'font-size:10.0pt'>Veritas-bu =
maillist -
Veritas-bu AT mailman.eng.auburn DOT edu <a
href=3D"http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu"; =
target=3D"_blank">http://mailman.eng.auburn.edu/mailman/listinfo/veritas=
-bu</a></span></font>
<o:p></o:p></p>
</div>
</body>
</html>
------_=_NextPart_001_01C37E16.008CBEB0--
|
