Unsubscribing is not supported in the NB 4.5 release.  You'll have to wait
until 5.0.  

Perhaps you can write a script to do what you want with your 4.5
environment, or there may be a third-party product that will assist you in
unsubscribing.

If all else fails, call support: 1-800-342-0652.  Good luck,

--
 Drew Fabbro [fabbro.andrew AT cnf DOT com]
 Unix Systems Group
 Desk: 503-450-3374
 Cell: 503-701-0369


-----Original Message-----
From: Frank Zhang [mailto:fzhang AT hsc.unt DOT edu] 
Sent: Thursday, September 11, 2003 9:18 AM
To: Fabien.LIOU AT fr.thalesgroup DOT com
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] slow backup on LTO2 drives


can somebody tell me how to unsubscirbe this mailing list ? Thanks a lot.
Frank

On Thu, 11 Sep 2003 Fabien.LIOU AT fr.thalesgroup DOT com wrote:

> Hello,
> 
> 
> I've a STK L700 library with 4 LTO2 drives.
> My master NBU server is under Solaris8 (with latest kernel patch and 
> LTO2
> patch)  with NBU4.5fp5
> 
> Interfaces between drives and master are 2gigabit.
> Switch is a sphereon 4500
> 
> 
> 
> My st.conf file is:
> 
> tape-config-list=
> 
>         "IBM     ULTRIUM-TD2",  "IBM Ultrium-2",
> "CLASS_LTO2",    
>         "IBM     ULT3580-TD2",  "IBM 3580 Ultrium-2",
> "CLASS_LTO2";    
>  
> 
> CLASS_LTO2      =       1,0x3B,0,0x45863d,2,0x40,0x42,1;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=0 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=1 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=2 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=3 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=4 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=5 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=6 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=7 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=8 lun=0;
> 
>  
> 
>  
> 
> name="st" class="scsi"
> 
>         target=9 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=10 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=11 lun=0;
> 
>  
> 
> name="st" class="scsi"
> 
>         target=12 lun=0;
> 
> name="st" parent="fp" target=0;
> 
> 
> 
> My sg.conf is:
> 
> # Configuration file for SCSA Generic.
> #
> name="sg" class="scsi" target=0 lun=0;
> name="sg" class="scsi" target=0 lun=1;
> name="sg" class="scsi" target=1 lun=0;
> name="sg" class="scsi" target=1 lun=1;
> name="sg" class="scsi" target=2 lun=0;
> name="sg" class="scsi" target=2 lun=1;
> name="sg" class="scsi" target=3 lun=0;
> name="sg" class="scsi" target=3 lun=1;
> name="sg" class="scsi" target=4 lun=0;
> name="sg" class="scsi" target=4 lun=1;
> name="sg" class="scsi" target=5 lun=0;
> name="sg" class="scsi" target=5 lun=1;
> name="sg" class="scsi" target=6 lun=0;
> name="sg" class="scsi" target=6 lun=1;
> name="sg" class="scsi" target=7 lun=0;
> name="sg" class="scsi" target=7 lun=1;
> name="sg" class="scsi" target=8 lun=0;
> name="sg" class="scsi" target=8 lun=1;
> name="sg" class="scsi" target=9 lun=0;
> name="sg" class="scsi" target=9 lun=1;
> name="sg" class="scsi" target=10 lun=0;
> name="sg" class="scsi" target=10 lun=1;
> name="sg" class="scsi" target=11 lun=0;
> name="sg" class="scsi" target=11 lun=1;
> name="sg" class="scsi" target=12 lun=0;
> name="sg" class="scsi" target=12 lun=1;
> 
> 
> When i do a "dd", performance seems to be ok (30Mo/s).
> But when i use NBU, i usually obtain 5Mo/s locally or remotely!!
> 
> 
> Does anyone can point me to the misconfiguration ?
> 
> 
> Thanks.
> 
> 
> Fabien
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu 
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu