Veritas-bu

[Veritas-bu] Please help... Lost st.conf data

2003-07-08 22:09:23
Subject: [Veritas-bu] Please help... Lost st.conf data
From: jrothlisberger AT Indeliq DOT com (John Rothlisberger)
Date: Tue, 8 Jul 2003 21:09:23 -0500
ok, I am getting tired of replying to my own emails.

Right after I send this out I was able to get bpdbm and bprd to run
and was able to run bp to do some restores.

After I stated a restore, it failed with:
18:52:43 (39267.001) INF - TAR EXITING WITH STATUS = 40

I suspect that the entry that I have put into the st.conf file is
incorrect.

I added:
"SEAGATE ULTRIUM06242-XX","Seagate LTO","SEAGATE_LTO";
SEAGATE_LTO = 1,0x36,0,0x1d639,4,0x00,0x00,0x00,0x00,1;

Can anybody tell me if this is right or what is the correct entry?

Thanks again,
John

> -----Original Message-----
> From: John Rothlisberger 
> Sent: Tuesday, July 08, 2003 8:38 PM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] Please help... Lost st.conf data
> 
> 
> Well, got farther but am still having trouble.
> 
> I have been able to get the drive and robot configured and can see 
> media etc.  Looks good.
> 
> When I try to do a restore using bp I get:
> Cannot connect to server
> 
> bprd is not running and won't stay running.  
> In /var/adm/messages I see:
> Jul  8 18:24:02 chimisc1 bprd[223]: [ID 192819 daemon.error] 
> Cannot contact NetBackup bpdbm. Terminating.
> 
> 
> Any ideas?  Really, any?
> 
> Thanks,
> John
> 
> > -----Original Message-----
> > From: John Rothlisberger 
> > Sent: Tuesday, July 08, 2003 5:19 PM
> > To: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: [Veritas-bu] Please help... Lost st.conf data
> > 
> > 
> > This morning we had a drive 0 failure and I have had to 
> > rebuild it.   Part of what I need
> > to get my robot working again are the entries that need to go 
> > into st.conf.
> > 
> > We are using NetBackup 3.4.1_3 server on a Solaris 8 Sun 220R.
> > The robot is a StorageTek L20 with a single seagate 
> > STU420001LW LTO drive.
> > 
> > All of my Netbackup data was on a seperate drive and not 
> > lost, but I can no longer start
> > up vmadm or bpadm.
> > 
> > I cannot see the robot or drive anymore.
> > 
> > Any help would be appreciated.
> > 
> > Thanks,
> > John
> > 
> > > --
> > > John Rothlisberger
> > > Unix Systems Administrator
> > > jrothlisberger AT indeliq DOT com
> > > 
> > > Indeliq, An Accenture Company
> > > 1 North Franklin, Suite 2200
> > > Chicago, IL  60606
> > > Phone:    312.442.6672
> > > Fax:        312.442.6606
> > >  http://www.indeliq.com
> > > 
> > > 
> > 
> > _______________________________________________
> > Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > 
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 


<Prev in Thread] Current Thread [Next in Thread>