Veritas-bu

[Veritas-bu] FlashBackup status code 20

2003-07-03 07:15:22
Subject: [Veritas-bu] FlashBackup status code 20
From: paulg AT CDCNA DOT COM (Paul Gimpelev)
Date: Thu, 3 Jul 2003 07:15:22 -0400
Do you have the partition that you are trying to back up mounted?

paulg

On Jul 3,  8:14am, FELIX DIAZ DE RADA QUINTANA wrote:
> Subject: RE: [Veritas-bu] FlashBackup status code 20
> I enabled the logs and this is what I found:
>
> - in the bpbkar log, the bpbfsmap process complaint about the raw partition
> to be backed up, saying that its mount can not be found.
>
> Maybe the problem is the following, but I'm not sure: This partition is
> mirrored using Solstice DiskSuite 4.2.1 and maybe this is not accesible for
> Veritas FlashBackup agent.
>
> I've also tried using the metadevice as input for the backup policy
> (/dev/md/rdsk/d31) but again, this doesn't work.
>
> So the question is if Veritas FlashBackup Option is compatible with Solstice
> DiskSuite.
>
> By the way, the version of Solaris in the client is 8.
>
> Regards,
>
> Felix.
>
>
> -----Original Message-----
> From: paulg AT CDCNA DOT COM
> To: FELIX DIAZ DE RADA QUINTANA; 'paulg AT CDCNA DOT COM'
> Cc: 'veritas-bu AT mailman.eng.auburn DOT edu'
> Sent: 03/07/2003 0:19
> Subject: Re: [Veritas-bu] FlashBackup status code 20
>
> As far as your backup cache device goes - any raw partition should be
> OK.  Have
> you tried enabling the logs?  I would look in bpbkar log for any errors.
> I
> would also re-run /usr/openv/netbackup/bin/driver/fb_snap.install to
> make sure
> that your installation is fine.  By the way, which version of Solaris
> are you
> using on the client that runs the backup?
>
> paulg
>
> On Jun 30,  9:58am, FELIX DIAZ DE RADA QUINTANA wrote:
> > Subject: RE: [Veritas-bu] FlashBackup status code 20
> > Hi Paulg:
> >
> > Yes, I'm sure that I have a FlashBackup license installed on the
> Master
> > Server. And I distributed the software to the client box from the
> server via
> > command line.
> >
> > What I'm not sure is about the steps to perform in order to create the
> CACHE
> > device. I created one partition using the "format" utility of Solaris,
> but I
> > don't know if further operations are required...
> >
> > Thanks and regards,
> >
> > Felix Díaz de Rada
> > fdiaz AT landata.payma DOT es
> > Unidad de Servicios Avanzados
> > Landata Payma S.A.
> >
> > > -----Mensaje original-----
> > > De: paulg AT CDCNA DOT COM [mailto:paulg AT CDCNA DOT COM]
> > > Enviado el: viernes 27 de junio de 2003 17:49
> > > Para: FELIX DIAZ DE RADA QUINTANA; 'paulg AT CDCNA DOT COM ';
> > > ''veritas-bu AT mailman.eng.auburn DOT edu ' '
> > > Asunto: Re: [Veritas-bu] FlashBackup status code 20
> > >
> > >
> > > That looks good.  Do you have your license for FlashBackup
> > > installed on the
> > > master?  Did you distribute FlashBackup binaries from the
> > > master or was it a
> > > local install?  Also, you might want to check for spaces/special
> > > characters/newline in your files definition.
> > >
> > > paulg
> > >
> > > On Jun 27,  5:44pm, FELIX DIAZ DE RADA QUINTANA wrote:
> > > > Subject: RE: [Veritas-bu] FlashBackup status code 20
> > > > Hi paulg:
> > > >
> > > > The files section of the policy is this:
> > > >
> > > > CACHE=/dev/rdsk/c1t1d0s5
> > > > /dev/rdsk/c1t2d0s1
> > > >
> > > > The first one is the cache device, (about 7 GB).
> > > > The last one is the the partition to be backed up, (about 62 GB).
> > > >
> > > > regards,
> > > >
> > > > Felix.
> > > >
> > >
> >
> > _______________________________________________
> > Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> >-- End of excerpt from FELIX DIAZ DE RADA QUINTANA
>
>-- End of excerpt from FELIX DIAZ DE RADA QUINTANA




<Prev in Thread] Current Thread [Next in Thread>