Veritas-bu

[Veritas-bu] loosing tape id's

2002-10-03 16:29:37
Subject: [Veritas-bu] loosing tape id's
From: sjaffee AT soe.sony DOT com (Jaffee, Sid)
Date: Thu, 3 Oct 2002 13:29:37 -0700
Put in one new tape (with a barcode label that had the next incremental
number printed on it), but upon doing a "inventory robot" I getting no
barcodes readable at all. Did "update volume configuration" and thereafter I
get:

-----
10/2/02 2:16:39 PM > Inventory  for TLD(0) on mojo
-----
        Robot Contents
 Slot   Tape  Barcode      
====    ==================
   1     Yes  -none-
   2     Yes  -none-
   3     Yes  -none-
   4     Yes  -none-
   5     Yes  -none-
   6     Yes  -none-
-----

Did the "compare" option too, they are now coming up as "A00000" and so
on...

-----
10/2/02 2:17:09 PM > Compare robot contents for TLD(0) on mojo
-----
        Robot Contents          Volume Configuration 
Slot    Tape  Barcode           Media ID Barcode        Mismatch Detected 
====    ===================     ======================  =================   
1        Yes  -none-            A00000   -none-          
2        Yes  -none-            A00001   -none-          
3        Yes  -none-            A00002   -none-          
4        Yes  -none-            A00003   -none-          
5        Yes  -none-            A00005   -none-          
6        Yes  -none-            A00004   -none-        
-----


The labels are fine (barcode and number are on displayed on them cleanly). I
should have "000900" thru "000906" in there (903 was pulled and 906 put in
place), but getting "A00000"/etc.


Other applicable specs:
- version 3.4.1GA NetBackup Administration
- Windows NT server


comments welcome,

Sid Jaffee
Systems Engineer

<Prev in Thread] Current Thread [Next in Thread>