Hi,
I am using NetBackup Datecenter 3.4 with Sun 450. Please help,
when I use sgscan I get these errors.
/dev/sg/c0t0l0: Disk (/dev/rdsk/c0t0d0): "FUJITSU MAG3182L SUN18G"
/dev/sg/c0t1l0: Disk (/dev/rdsk/c0t1d0): "FUJITSU MAG3182L SUN18G"
/dev/sg/c0t1l2: Error opening /dev/sg/c0t1l2, No such file or directory
/dev/sg/c0t2l0: Disk (/dev/rdsk/c0t2d0): "SEAGATE ST318404LSUN18G"
/dev/sg/c0t2l2: Error opening /dev/sg/c0t2l2, No such file or directory
/dev/sg/c0t3l0: Disk (/dev/rdsk/c0t3d0): "SEAGATE ST318404LSUN18G"
/dev/sg/c0t3l2: Error opening /dev/sg/c0t3l2, No such file or directory
/dev/sg/c0t4l2: Error opening /dev/sg/c0t4l2, No such file or directory
/dev/sg/c1t1l2: Error opening /dev/sg/c1t1l2, No such file or directory
/dev/sg/c1t2l2: Error opening /dev/sg/c1t2l2, No such file or directory
/dev/sg/c1t3l2: Error opening /dev/sg/c1t3l2, No such file or directory
/dev/sg/c1t4l2: Error opening /dev/sg/c1t4l2, No such file or directory
/dev/sg/c2t0l0: Changer: "STK L180"
/dev/sg/c2t1l2: Error opening /dev/sg/c2t1l2, No such file or directory
/dev/sg/c2t2l2: Error opening /dev/sg/c2t2l2, No such file or directory
/dev/sg/c2t3l2: Error opening /dev/sg/c2t3l2, No such file or directory
/dev/sg/c2t4l2: Error opening /dev/sg/c2t4l2, No such file or directory
/dev/sg/c3t1l0: Tape (/dev/rmt/5): "STK 9840"
/dev/sg/c3t1l2: Error opening /dev/sg/c3t1l2, No such file or directory
/dev/sg/c3t2l2: Error opening /dev/sg/c3t2l2, No such file or directory
/dev/sg/c3t3l0: Tape (/dev/rmt/2): "STK 9840"
/dev/sg/c3t3l1: key 0h, ASC 0h, ASCQ 0h
scsi inquiry command failed
/dev/sg/c3t3l2: Error opening /dev/sg/c3t3l2, No such file or directory
/dev/sg/c3t4l2: Error opening /dev/sg/c3t4l2, No such file or directory
/dev/sg/c4t1l2: Error opening /dev/sg/c4t1l2, No such file or directory
/dev/sg/c4t2l0: Tape (/dev/rmt/1): "STK 9840"
/dev/sg/c4t2l2: Error opening /dev/sg/c4t2l2, No such file or directory
/dev/sg/c4t3l2: Error opening /dev/sg/c4t3l2, No such file or directory
/dev/sg/c4t4l0: Tape (/dev/rmt/3): "STK 9840"
/dev/sg/c4t4l1: key 0h, ASC 0h, ASCQ 0h
scsi inquiry command failed
/dev/sg/c4t4l2: Error opening /dev/sg/c4t4l2, No such file or directory
The drives even stay up after I added the drive using the wizard
but it just can't mount it. when I check the dmesg, its saying that:
TLD(0) drive 1 (device 1) is being DOWNED, status: Robotic dismount
failure
Anyone ran into these error, any help would be greatly
appreciated.
Best Regards,
=======================
Kumar Deuja
kdeuja AT kdeuja DOT com
page:ekdeuja AT kdeuja DOT com
=======================
|
