Veritas-bu

[Veritas-bu] WRN - timeout (300) while waiting for message: ' Clear Archive Bits'

2002-07-31 11:54:51
Subject: [Veritas-bu] WRN - timeout (300) while waiting for message: ' Clear Archive Bits'
From: Paul.Griese AT TeleCheck DOT com (Griese, Paul)
Date: Wed, 31 Jul 2002 10:54:51 -0500
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_000_01C238AA.9AFA0EB0
Content-Type: text/plain;
        charset="iso-8859-1"

Is there supposed to be a numerical value placed into those two settings? If
so, then what should the value be?

Paul Griese
System Management
(713) 331-6454


-----Original Message-----
From: scott.kendall AT abbott DOT com [mailto:scott.kendall AT abbott DOT com]
Sent: Monday, July 22, 2002 3:17 PM
To: valcarcel AT caracas.oilfield.slb DOT com
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] WRN - timeout (300) while waiting for message:
'Clear Archive Bits'



It is a client side setting that is in the Registry at the following
location:

HKLM\SOFTWARE\VERITAS\NetBackup\CurrentVersion\config

value name=Clear_Archive_Bit_Incr_Wait
value type=REG_DWORD


- Scott



 

                    valcarcel AT caracas.oilfield DOT sl

                    b.com (Rafael Valcarcel)             To:
veritas-bu AT mailman.eng.auburn DOT edu                                 
                    Sent by:                             cc:

                    veritas-bu-admin AT mailman DOT eng.        Subject:
[Veritas-bu] WRN - timeout (300) while waiting for message:  
                    auburn.edu                           'Clear Archive
Bits'                                                      
 

 

                    07/22/2002 01:02 PM

 

 





Hi,

I am backing-up a NT client. The backup is ending with a 41 status. The
bpbkar log shows the following:

WRN - timeout (300) while waiting for message: 'Clear Archive Bits'

I added the following lines to the bp.conf file in the server:

CLIENT_READ_TIMEOUT = 600
CLIENT_CONNECT_TIMEOUT = 600


but still the exact same warning. Any ideas?.

Thanks!.
Rafael Valcarcel.


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu




_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


------_=_NextPart_000_01C238AA.9AFA0EB0
Content-Type: application/octet-stream;
        name="Griese, Paul.vcf"
Content-Disposition: attachment;
        filename="Griese, Paul.vcf"

BEGIN:VCARD
VERSION:2.1
N:Griese;Paul
FN:Griese, Paul
ORG:TeleCheck;ITSS Systems Management
TITLE:Asst. Systems Manager
TEL;WORK;VOICE:(713) 331-6454
TEL;HOME;VOICE:IT-SS
ADR;WORK;ENCODING=QUOTED-PRINTABLE:;Houston;Attn:  Systems Mgmt.=0D=0A5251 
Westheimer;Houston;Texas;77056-5404
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Houston=0D=0AAttn:  Systems 
Mgmt.=0D=0A5251 Westheimer=0D=0AHouston, Texas 7=
7056-5404
EMAIL;PREF;INTERNET:Paul.Griese AT TeleCheck DOT com
REV:20001207T153309Z
END:VCARD

------_=_NextPart_000_01C238AA.9AFA0EB0--

<Prev in Thread] Current Thread [Next in Thread>
  • [Veritas-bu] WRN - timeout (300) while waiting for message: ' Clear Archive Bits', Griese, Paul <=