[Veritas-bu] status code 54 problem -- SOLVED

D'oht. 
One of my media servers wasn't in the hosts file -- oops.

BTW, is there a way to force a client to use a certain media
server? Some of our media servers have gigabit nics in them
and others are just 100 Mbit. I'd prefer to force to the 
gigabit, but don't want to necessarily override the class
definition (Any availiable). All SAN media servers/clients
are set with MUST_USE_LOCAL_MEDIA.

> -----Original Message-----
> From: McCormick, Diane S [mailto:Diane_McCormick AT AIMFUNDS DOT COM]
> Sent: Tuesday, February 12, 2002 4:24 PM
> To: 'Ballowe, Charles'
> Subject: RE: [Veritas-bu] status code 54 problem
> 
> 
> do you have both servers in the Netbackup configuration on 
> the client? this
> could also cause name resolution problems....
> 
> 
> 
> 
> -----Original Message-----
> From: Ballowe, Charles [mailto:CBallowe AT usg DOT com]
> Sent: Tuesday, February 12, 2002 4:13 PM
> To: 'McCormick, Diane S'
> Subject: RE: [Veritas-bu] status code 54 problem
> 
> 
> they're already there. doesn't work. other suggestions?
> 
> > -----Original Message-----
> > From: McCormick, Diane S [mailto:Diane_McCormick AT AIMFUNDS DOT COM]
> > Sent: Tuesday, February 12, 2002 4:10 PM
> > To: 'Ballowe, Charles'
> > Subject: RE: [Veritas-bu] status code 54 problem
> > 
> > 
> > try putting the master and media server in the clients host 
> > table....if that
> > works then it is a DNS problem..........
> > 
> > 
> > 
> > -----Original Message-----
> > From: Ballowe, Charles [mailto:CBallowe AT usg DOT com]
> > Sent: Tuesday, February 12, 2002 3:51 PM
> > To: 'veritas-bu AT mailman.eng.auburn DOT edu'
> > Subject: [Veritas-bu] status code 54 problem
> > 
> > 
> > I'm having a problem coercing a new client to back-up.
> > The clients are Compaq Alphas running Tru64 5.1, so are the
> > servers. Backups work just fine to the boxen that are also
> > SAN media servers.
> > 
> > here's from a verbose bpsched log:
> > 14:31:42 [1222363] <2> db_getCLIENTlist: from 
> > db_CLIENTreceive: no entity
> > was found 227
> > 14:31:42 [1222363] <4> get_db_info: Failed to get client list
> > 14:31:43 [1222363] <4> add_to_worklists: adding clientjob for 
> > oraprodapp1 to
> > worklist[9]
> > 14:31:43 [1222363] <4> ?: --------------------------
> > 14:31:43 [1222363] <4> ?: RETENTION LEVEL 9 WORKLIST
> > 14:31:43 [1222363] <4> ?:   client: oraprodapp1  class: full  
> > sched: forever
> > (FULL)
> > 14:31:43 [1222363] <4> ?: --------------------------
> > 14:31:43 [1222363] <4> ?: RETENTION LEVEL 8 WORKLIST
> > 14:31:43 [1222363] <4> ?: --------------------------
> > 14:31:43 [1222363] <4> ?: RETENTION LEVEL 7 WORKLIST
> > 14:31:43 [1222363] <4> ?: --------------------------
> > 14:31:43 [1222363] <4> ?: RETENTION LEVEL 6 WORKLIST
> > 14:35:11 [1222399] <16> log_in_errorDB: scheduler exiting - 
> timed out
> > connecting to client (54)
> > 14:35:11 [1222399] <16> bpsched: scheduler exiting - timed 
> > out connecting to
> > client (54)
> > 
> > and from the bpcd log on the client:
> > 15:01:53 [2687] <2> bpcd main: offset to GMT 21600
> > 15:01:53 [2687] <2> bpcd main: setup_sockopts complete
> > 15:01:53 [2687] <2> bpcd main: output socket port number = 998
> > 15:01:53 [2687] <8> bpcd peer_hostname: gethostbyaddr failed :
> > HOST_NOT_FOUND (1)
> > 15:01:53 [2687] <16> bpcd peer_hostname: gethostbyaddr failed 
> > to return peer
> > host, herrno = 1
> > 15:01:53 [2687] <16> bpcd main: Couldn't get peer hostname
> > 
> > any ideas?
> > thanks
> > -charlie
> > _______________________________________________
> > Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > 
>