What does your sgscan display?

David

Quoting Jason Ahrens <Jason.Ahrens AT telus DOT com>:

> I have found the reason for my earlier problem, but I 
do not have any idea
> how to deal with it. It seems my robot itself is 
malfunctioning.
> 
> root@veritasmaster1:/usr/openv/netbackup/logs# 
robtest 
> Configured robots with local control supporting test 
utilities:
>   TLD(0)     robotic path = /dev/sg/c4t0l0
> 
> Robot Selection
> ---------------
>   1)  TLD 0
>   2)  none/quit
> Enter choice: 1
> 
> Robot selected: TLD(0)   robotic path = /dev/sg/c4t0l0
> 
> Invoking robotic test utility:
> /usr/openv/volmgr/bin/tldtest -r /dev/sg/c4t0l0 
> 
> Opening /dev/sg/c4t0l0
> mode_sense failed, CHECK CONDITION
> sense key = 0x2, asc = 0x4, ascq = 0x3, LU IS NOT 
READY, MANUAL
> INTERVENTION
> REQ'D
> 
> having not delt with this before, can anyone offer 
any suggestions?
> 
> Thanks
> 
> Jason
> 
> --
> Jason Ahrens
> Systems Administrator/Backup Specialist
> PSINet Canada Inc., a TELUS company
> http://www.psi.ca
> The Future is Friendly
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-
bu AT mailman.eng.auburn DOT edu
> 
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-
bu
> 



<><><><><><><><><><><><><><><><><><><><>
David A. Chapa
Consulting Manager
DataStaff, Inc.
847 413 1144
http://www.consulting.datastaff.com
---------------------------------------
http://www.xbpadm-commands.com
NBU-LSERV AT datastaff DOT com - Adv. Scripting