[Veritas-bu] ATL7100 Auto-insert
2001-10-03 16:04:35
Hello,
We are running an ATL7100 library and have started striking a problem now
that it's nearly full.
If an operator inserts media thru the mailslots while there are tapes
currently in the drives, the new volumes are sometimes moved to the
temporarily empty slots that are still assigned in Netbackup to the media in
the drives. When the tape is removed from the drive the library attempts to
return it to the same slot it was originally taken from, fails and downs the
drive.
Is there a way around this without disabling the auto-insert on the library
and moving the new media to known available slots?
Thanks, Gavin
____________________________________________________________________
CAUTION - This message may contain privileged and confidential
information intended only for the use of the addressee named above.
If you are not the intended recipient of this message you are hereby
notified that any use, dissemination, distribution or reproduction
of this message is prohibited. If you have received this message in
error please notify Air New Zealand immediately. Any views expressed
in this message are those of the individual sender and may not
necessarily reflect the views of Air New Zealand.
_____________________________________________________________________
For more information on the Air New Zealand Group, visit us online
at http://www.airnewzealand.com
_____________________________________________________________________
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] ATL7100 Auto-insert,
Gregory, Gavin <=
|
|
|